Cart
Your shopping cart is empty! 
Delock 3.5″ Mobile Rack for 1 x 2.5″ SATA HDD / SSD
To purchase this product you must be registered in our system.
Specification
depth: 0.111
height: 0.037
width: 0.159
Description
| This Delock Mobile Rack is designed for external or internal connection of a 2.5″ SATA HDD. Insert the HDD directly into the frame and connect it either externally to a Power Over eSATA port with the help of an optional cable, or internally to SATA. The dimension of the frame complies to a standard 3.5″ HDD. Thus you can install the frame into a 3.5″ slot as well as into a 5.25″ mobile rack. System requirements: • For external using: PC or laptop with a free Power Over eSATA port (optional eSATAp cable item 84396 / 84432) • For internal using: 1 SATA data cable PC with a free SATA port Power supply with a free SATA power connector Specification: • Connectors: outside: 1 x SATA 22 pin plug inside: 1 x SATA 22 pin receptacle (NSS connector) • Suitable for 2.5″ SATA HDD / SSD: HDD height up to 12.5 mm SATA HDD / SSD up to 6 Gb/s supports 5 V HDD / SSD • Data transfer rate up to 6 Gb/s • Possible applications: 1. internally in a 3.5″ bay 2. inside a 5.25″ mobile rack 3. externally over eSATAp (cable optional) • Hot Swap • With special SATA NSS connector inside to protect the SATA connector of the HDD from wear at each change • Optional HDD fan (mounting holes on the bottom side of mobile rack) • OS independent, no driver installation necessary Package content: • Mobile Rack • 1 x 2.5″ hard drive protective film • Screws • User manual Data sheet: http://www.delock.de/produkt/47224/pdf.html?sprache=en |
DCP SIA © 2025
Powered By:
