Cart
Your shopping cart is empty! Navilock NL-8004U USB 2.0 Multi GNSS Receiver u-blox 8 4.5 m
To purchase this product you must be registered in our system.
The USB 2.0 Multi GNSS receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. It is possible to use this Multi GNSS receiver with a laptop and suitable routing software for navigation. The NL-8004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design. System requirements: • Linux Kernel 2.6 or above • Windows Vista/7/8.1/10/11 • PC or laptop with a free USB Type-A port • For devices with OTG function and optional OTG adapter: Windows 10 Specification: • Connector: 1 x USB 2.0 Type-A male • Chipset: u-blox 8 UBX-M8030-KT • Frequency: GPS: L1, 1575.4200 MHz GLONASS: L1, 1602 (k x 0.5625) MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO: E1, 1575.4200 MHz QZSS: L1, 1575.4200 MHz • Accepts the signals of up to 72 satellites at the same time • Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS) • Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG • Auto Baud Rate up to 115200 bps • Update rate: single GNSS: 18 Hz (e.g. GPS solo) multi GNSS: 10 Hz (e.g. GPS+GLONASS) • Sensibility: max. -167 dBm • Protection class: IPX7 • LED-indicator for GPS status • Operating temperature: -20 °C ~ 60 °C • Power supply: 5 V DC • Current consumption: max. 45 mA • Cold start in ca. 26 seconds • Hot start in ca. 1 second • Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS • Cable length: ca. 4.5 m • Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm Package content: • USB 2.0 receiver • Mounting material: stainless steel nut and washer • Navilock support CD incl. driver and user manual Data sheet: http://www.navilock.de/produkt/62531/pdf.html?sprache=en |