4-Port Gigabit PoE Industrial Switch, 2 PoE Outputs, 1 x Gigabit SFP, 1 x Gigabit RJ45, 65W

LevelOne

55052507

New

4-Port Gigabit PoE Industrial Switch, 2 PoE Outputs, 1 x Gigabit SFP, 1 x Gigabit RJ45, 65W This IGP-0401 Industrial 4 port Gigabit Ethernet Switch is equipped with two PoE ports. The PSE ports are critical for your PD environment. They will not only perform your network job, but also provide PSE power to your PD WiFi or IP CAM applications. This product has been rigorously tested in harsh environment. These PSE ports can be powered by 48-56 VDC input voltage. The additional Gigabit TX port and Gigabit SFP port can be easily cascaded to extend your existing networks. With its multi- purpose design, it can also be Din-Rail or wall-mounted. It is an ideal unit for Mobile Base Station (BTS), IP surveillance, traffic monitoring and security application in critical environment. It can tolerate -40°C to 75°C in harsh environment to perform a reliable network Key Features - 2 Gigabit PoE ports, 1 Gigabit port and 1 Gigabit SFP slot - Total PoE power budget: 65W, up to 30W per port - Supports DIN-rail installation - -40°C to 75°C operating temperature range - Redundant power inputs with Terminal Block Specifications System Specifications Standards & Protocols: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE802.3af for POE IEEE802.3at for POE+ Port: 3 x RJ-45 10/100/1000BaseT(X) auto negotiation, 1 x 100/1000M SFP 2 x Gigabit 30Watts POE+ 802.3af/at PSE port 1 x Gigabit Tx Auto MDI/MDI-X function, Full/Half duplex Indicator: PW1 (Green): ON-Power is detected PW2 (Green): ON-Power is detected PW3 (Amber): ON-Power is detected RLY (Amber): ON-Connect only PW1 or PW2 OFF-Connect both PW1 and PW2 www.level1.com Page 1 of 4 TX/RJ-45 port: LNK (Green): ON?TX port is detected Flashing-TX data is transmitting/receiving POE (Amber): ON-PSE is activated and PD is detected OFF-PSE is detecting PD SFP port (Green): ON-SFP port is detected Flashing-SFP data is transmitting/receiving Power Input: Redundant Dual DC 48V-56V Power Input POE input 48-56VDC Power Output: 2 x 30W, Max total power 65 Watts Power Consumption: 4.0 W@48 VDC full load, Without POE Backplane (Gbps): Back-plane (Switching Fabric): 8Gbps MAC Address Table: 8K Features General: 1000Base-T, 100 Base-Tx, 10Base-T Ethernet 2Port PoE Output PoE: PoE power per port 30Watts, Maximum 36Watts Maximum total power 65Watts with 56VDC input, Support IEEE802.3af/at Ease of Use: Plug & Play Performance Packet Forwarding Rate: 1.488 * 4 Mpps Jumbo Frame (K): 10KB Environment Operating Temperature (°C): -40°C ~75°C fully tested Operating Humidity (Non-condensing): 5% to 95% (Non-condensing) Physical Specifications Dimensions (W x D x H mm): 36.2 x 105 x 142 mm Weight (g): 520g www.level1.com Page 2 of 4 Reliability MTBF: >500,000 hrs ( MIL-HDBK-217F) at 25°C Approval and Compliance EMI/EMS: CE, FCC, VCCI FCC Part 15 Subpart B Class A, CE EN 55022 Class A Safety: IEC EN60950-1 Environmental Test: EN 60068-2-6 EN 60068-2-27 EN 60068-2-32

Industrial networks

Accept Site use cookies