Cart
Your shopping cart is empty! Digitus Network cabinet Dynamic Basic series - 600x800 mm (WxD)
To purchase this product you must be registered in our system.
26U network rack, Dynamic Basic 1330x600x800 mm, color black (RAL 9005) The DIGITUS® Dynamic Basic series has been manufactured, designed and developed for the high demands of IT infrastructure Roof is prepared to accommodate a fan element (punched-out mounts) Lockable swivel lever handle on the front door Base with punched cable inlet, covered with screwed plate The Dynamic series network cabinets have been developed for simple and particularly cost-optimized network expansion. Sophisticated positioning of the cable inlets ensures effortless installation depending on the application. In the floor chassis, this is located centrally at the rear, protected by a screw-fastened cover plate. Enclosures from 800 mm width are additionally extended by cable inlets with plastic covers on the left and right. These are also integrated in the roof (1 x for 600 mm enclosure width, 3 x for 800 mm enclosure width). The roof chassis is also provided with a punched-out area to accommodate a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. They can be adjusted in depth and are connected to additional depth braces in the cabinet. Each enclosure is a robust steel construction made from sheet steel up to 1.5 mm thick. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Removable side and rear panels as well as the lockable and removable front door improve accessibility. The door hinges can be changed. Furthermore, the cabinets can be completely dismantled if required thanks to the demountable design. Cabinet type: Network cabinet Color: black, RAL 9005 Depth: 800 mm Front door: Glass door, single opening Load capacity: 600 kg Rear door: Rear panel with lock, detachable Side panels: Both sides Units: 26 Width: 600 mm IP protection class: IP20 Mounted: true Protection class IP20 Front door made entirely of metal frame with safety glass Locking system with swivel lever handle on front door 120° door opening angle 1-point locking on the front door Rear and side panels are lockable and removable Incl. 4 levelling feet, enclosed 483 mm (19") profile rails mounted at the front and rear inside the enclosure, galvanized 483 mm (19") profile rails are adjustable in depth and marked with the height unit Base with punched cable inlet, covered with screwed plate Die-cut cable inlets with plastic cover in the roof Roof is prepared to accommodate a fan element (punched-out mounts) Various earthing points in the enclosure for built-in components Incl. installation set (screws, cage nuts, washers) Supplied fully assembled Installation depth for components min.-max.: 430-750 mm Package content: Earthing cable set Installation set (screws, cage nuts, washers) 2 x key |