Cart
Your shopping cart is empty! 
Digitus Wall-mounted enclosure Dynamic Basic series - 600x450 mm (WxD)
To purchase this product you must be registered in our system.
Specification
country of origin: CN
depth: 0.650
height: 0.530
height(cm): 62
length(cm): 52
volume(cm3): 154752
weight(kg): 21
width: 0.570
width(cm): 48
Description
| 9U wall mounting cabinet, Dynamic 478x600x450 mm, color grey (RAL 7035) Ready for immediate use: Delivery is assembled Quick and easy wall installation thanks to the enclosed mounting plate Flexible cable routing options thanks to pre-punched openings in the roof, base and rear wall Lockable safety glass door with 235° door opening angle Depth-adjustable 483 mm (19") profile rails Load capacity for the installation of components: 60 kg The Dynamic series wall-mounted network cabinets have been developed for simple and particularly cost-optimized network expansion. The roof, base and rear panel of each cabinet are equipped with a pre-punched cable inlet. The roof chassis is also provided with a punched-out area to accommodate a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. These can be adjusted in depth. Each cabinet is a robust steel construction made of up to 1.5 mm thick sheet steel. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Removable side panels and the lockable and removable front door improve accessibility. The door hinges can be changed. Wall mounting is carried out in two simple steps: The supplied mounting plate is screwed to the wall and then connected to the housing. Cabinet type: Wall mounting cabinet Color: light grey, RAL 7035 Depth: 450 mm Front door: Glass door, single opening Load capacity: 60 kg Side panels: Both sides Units: 9 Width: 600 mm IP protection class: IP20 Mounted: true Protection class IP20 Lockable safety glass door with steel frame 235° door opening angle 1-point locking on the front door 483 mm (19") profile rails mounted at the front and rear inside the enclosure, galvanized 483 mm (19") profile rails are adjustable in depth and marked with the height unit 0.8 - 1.2 mm robust sheet steel with high load-bearing capacity, powder-coated Cable entry possible at the rear, roof and base (pre-punched cut-outs) Roof is prepared to accommodate a fan element (punched-out mounts) Ventilation slots for active and passive ventilation 4 earthing points (base, side panel and front door) with protective cap Installation depth for components min. - max.: 335 - 380 mm Package content: Earthing cable set Installation set (screws, cage nuts, washers) 2 x key |
Roline 19-inch wall-mounted housing Pro 12 U, 600x600 WxD IP55 outdoor grey
Product Code: 26.21.0087
DCP SIA © 2025
Powered By:
