Cart
Your shopping cart is empty! 
D-Link SFP-Modul D-Link DEM-431XT MiniGBIC 10GE SFP+ (Multi-Mode) retail
To purchase this product you must be registered in our system.
Specification
certification: CE, FCC, VCCI, C-Tick, MSA
colour: various
compliance certificates: RoHS
current catalog edition: 24.1
depth: 11.8 mm
depth of packaging (single piece): 140 mm
duplex system: Full
fiber cable diameters supported (core/cladding): 50/125,62.5/125 µm
fiber ethernet cabling technology: 10GBASE
fiber optic connector: LC
gross weight: 0.06
harmonized system (hs) code: 85369010
height: 56.5 mm
height of packaging (single piece): 50 mm
hot-plug support: Yes
interface type: SFP+
link budget: 10.1 dB
manufacturer: D-LINK
master (outer) cases per pallet (air): 60 pc(s)
master (outer) cases per pallet (sea): 60 pc(s)
maximum current: 300 A
maximum data transfer rate: 10000 Mbit/s
maximum transfer distance: 550 m
maximum voltage: 3.3 V
mean time between failures (mtbf): 3960000 h
multi-mode fiber (mmf) supported: Yes
networking standards: IEEE 802.3ae
operating relative humidity (h-h): 5 - 85%
operating temperature (t-t): 0 - 70 °C
package depth: 131 mm
package height: 49 mm
package weight: 64 g
package weight (single piece): 0.06 kg
package width: 74 mm
pallet gross length: 102 cm
pallet gross weight (air): 272 kg
pallet gross weight (sea): 272 kg
pallet gross width: 122 cm
pallet height (air): 199 cm
pallet height (sea): 199 cm
product colour: Gold, Metallic
product group: Netzwerk-Switches
product type: SFP+-Transceiver-Modul
products per pallet (air): 3000 pc(s)
products per pallet (sea): 3000 pc(s)
products per shipping (inner) case: 50 pc(s)
rx power (max): -1 dBmW
rx power (min): -11.1 dBmW
safety: UL, TUV, CDRH
sfp transceiver standard: SR
sfp transceiver type: Fiber optic
shipping (inner) case gross weight: 4.2 kg
shipping (inner) case height: 31 cm
shipping (inner) case length: 36 cm
shipping (inner) case net weight: 3.2 kg
shipping (inner) case width: 26 cm
single-mode fiber (smf) supported: No
storage relative humidity (h-h): 5 - 95%
storage temperature (t-t): -40 - 85 °C
tx power (max): -1 dBmW
tx power (min): -6.5 dBmW
wavelength: 850 nm
weight: 18 g
width: 14.8 mm
width of packaging (single piece): 70 mm
Description
| Designed to support distances up to 550 metres, the DEM-431XT is a high performance 850nm Multi-Mode SFP+ transceiver. Supporting Full-duplex, 10 Gigabit speeds on Multi-Mode fibre cables. The DEM-431XT is 802.3ae 10GBASE-SR compliant and supports Full-duplex 802.3x Flow control. The DEM-431XT provides the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa. D-Link’s 10G SFP+ Module series are hot-swappable SFP+ transceivers that plug into SFP+ slots on switches and support 10G Ethernet. The D-Link 10GBASE SFP+ Module Series transceivers offer customers a wide variety of 10G Ethernet connectivity options for data centers, enterprise wiring closets, and service provider transport applications. Enhanced Small Form-factor Pluggable Format The transceivers use the Enhanced Small Formfactor Pluggable format (SFP+). The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, ensuring lower costs, lower power disruption, and higher port density. They provide the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa, for the port to receive data from the network cable. Hot Pluggable All D-Link transceivers are hot-pluggable. You can connect a transceiver while the system is powered on without causing any problems. This permits modules to be added or removed without interrupting the network. 10G Ethernet speeds The transceivers all support 10G Ethernet, which results in very fast data transmissions of up to 10 Gbit/s. This is 10 times faster than Gigabit Ethernet and enables the switch to handle faster and higher data transmissions, making it very suitable for business needs. |
DCP SIA © 2025
Powered By:
