Cart
Your shopping cart is empty! 
Level One LevelOne Konverter GVT-2003 10/100/1000T> IEEE 802.3x Flow
To purchase this product you must be registered in our system.
Specification
ac adapter included: Yes
compliance certificates: CE
connectivity technology: Wired
converter input interface: 1000Base-LX, 1000Base-SX
copper ethernet cabling technology: 10BASE-T, 100BASE-TX, 1000BASE-T
country of origin: China
dc-in jack: Yes
depth: 94 mm
duplex system: Full, Half
ethernet interface type: Fast Ethernet, Gigabit Ethernet
ethernet lan (rj-45) ports: 1
ethernet lan data rates: 10,100,1000 Mbit/s
fiber mode structure: Single-mode
fiber optic connector: ST
flow control support: Yes
height: 26 mm
internal: No
jumbo frames: 9000
jumbo frames support: Yes
led indicators: Link, Power
link fault pass-through (lfp): Yes
link loss carry forward (llcf) supported: Yes
link loss return (llr) supported: Yes
master (outer) case gross weight: 31.2 kg
master (outer) case height: 480 mm
master (outer) case length: 390 mm
master (outer) case width: 360 mm
master (outer) cases per pallet (air): 16 pc(s)
maximum data transfer rate: 1000 Mbit/s
maximum transfer distance: 20000 m
networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
operating relative humidity (h-h): 5 - 90%
operating temperature (t-t): -10 - 55 °C
package depth: 120 mm
package height: 55 mm
package type: Box
package weight: 840 g
package width: 235 mm
pallet gross length: 80 cm
pallet gross width: 120 cm
pallet height (air): 158.4 cm
power consumption (typical): 5 W
product colour: Black
products per master (outer) case: 36 pc(s)
quick installation guide: Yes
storage relative humidity (h-h): 5 - 90%
storage temperature (t-t): -40 - 70 °C
sustainability compliance: Yes
wavelength: 1310 nm
weight: 200 g
width: 71 mm
Description
| The GVT-2003 SMF ST media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100/1000Base-T RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T, 100Base-TX and 1000Base-T auto-sensing. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km. The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as cut through and smart pass through mode. The GVT-2003 is able to operate in temperatures from -10° up to 55° Celsius. The converter can be used as a standalone unit or as a slide-in module to the CHV-2000 19” converter rack, which can accommodate up to 14 units for use in a central wiring closet. |
DCP SIA © 2025
Powered By:
