Cart
Your shopping cart is empty! 
Intellinet 4-Port Gigabit+1GE (PD) High PoE Switch
To purchase this product you must be registered in our system.
Specification
10g support: No
ac input frequency: 50 - 60 Hz
ac input voltage: 100 - 240 V
basic switching rj-45 ethernet ports quantity: 5
basic switching rj-45 ethernet ports type: Gigabit Ethernet (10/100/1000)
cable types supported: Cat3, Cat5, Cat5e
cables included: AC
certification: FCC Class A, CE, RoHS, UKCA, NDAA
copper ethernet cabling technology: 10BASE-T, 100BASE-TX, 1000BASE-T
depth: 93 mm
flow control support: Yes
full duplex: Yes
height: 32 mm
housing material: Metal
jumbo frames support: Yes
led indicators: Activity, Link, PoE, Power
mac address table: 2048 entries
manual: Yes
networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3u, IEEE 802.3x
operating relative humidity (h-h): 10 - 90%
operating temperature (t-t): 0 - 40 °C
package weight: 900 g
packet buffer memory: 1 MB
packet forwarding rate (1 gbps): 1488000 pps
packet forwarding rate (10 mbps): 14880 pps
packet forwarding rate (100 mbps): 148800 pps
power consumption (max): 72 W
power over ethernet (poe): Yes
power source: AC
power supply included: Yes
storage temperature (t-t): 0 - 70 °C
store-and-forward: Yes
switching capacity: 10 Gbit/s
total power over ethernet (poe) budget: 65 W
wall mountable: Yes
weight: 400 g
width: 168 mm
Description
| Get the most out each Power over Ethernet connection with this PoE passthrough switch The PoE-Powered 5-Port Gigabit Switch with PoE Passthrough from Intellinet Network Solutions is designed to take power from a PoE switch or injector and pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports, this switch can power up to four wireless LAN access points and bridges, VoIP phones or IP video cameras, draw its own power from the PoE switch it is connected to, and deliver network speeds of up to 1,000 Mbps. Usable as a PoE extender Thanks to its PoE passthrough technology that extends a PoE connection, this versatile unit doubles the range between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.). Using it this way also eliminates the time and expense of electrical rewiring, which ultimately minimizes the unsightly clutter of power cables in awkward places such as ceilings and walls while providing up to 30 W to compatible devices. Power over Ethernet 802.3bt Compliant This switch supports the IEEE 802.3bt protocol over four pairs (4PPoE), which allows for a power input up to 95 W. It forwards data at Gigabit speeds and offers up to 30 watts per port to a connected IEEE 802.3at- or IEEE 802.3af-compliant device. The Perfect Workgroup Switch When you connect the PD port (port 5) to a PoE injector or switch, this product uses some of the electric current to power itself and passes the available surplus power to up to four PoE edge devices, such as VoIP phones, allowing you to realize the full potential of each of the PSE ports in your data center. Eliminate Bottlenecks with Gigabit Speeds Equipped with five auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the 10 Gbps switch fabric provides plenty of performance for your computers and other networking devices. Wall-mount option For full installation flexibility, you can mount the switch on the wall through its four built-in holes or use the included non-slip rubber feet to place it on a desktop. |
DCP SIA © 2025
Powered By:
