D-Link DGS-108 Melns

Product Code: DGS-108/E
Barcode 0790069368240

To purchase this product you must be registered in our system.

 

Specification
10g support: Yes
auto mdi/mdi-x: Yes
basic switching rj-45 ethernet ports quantity: 8
certification: FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB, RoHS
colour: black
connectivity technology: Wired
copper ethernet cabling technology: 1000BASE-T, 100BASE-TX, 10BASE-T
current catalog edition: 24.1
current catalog page: 1.11
data transfer rate: 2000 Mbit/s
depth: 85 mm
depth of packaging (single piece): 90 mm
dimensions (wxdxh): 162 x 102 x 28 mm
flow control support: Yes
full duplex: Yes
gross weight: 0.422
harmonized system (hs) code: 85176990
height: 22.4 mm
height of packaging (single piece): 90 mm
housing material: Metal
included power plug types: EU
input current: 1 A
input voltage: 5 V
jumbo frames support: Yes
lan (mbps): 10/100/1000
led indicators: Link, Power
mac address filtering: Yes
mac address table: 8000 entries
mains connection: Gerät-Schutzkontaktstecker, Typ-E/F
management: Layer2
manufacturer: D-LINK
master (outer) cases per pallet (air): 48 pc(s)
master (outer) cases per pallet (sea): 48 pc(s)
maximum data transfer rate: 1 Gbit/s
mean time between failures (mtbf): 2053751 h
network standard: Gigabit Ethernet
networking standards: IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
operating relative humidity (h-h): 10 - 90%
operating temperature (t-t): 0 - 50 °C
package depth: 250 mm
package height: 68 mm
package weight: 654 g
package weight (single piece): 0.422 kg
package width: 208 mm
packet buffer memory: 0.128 MB
pallet gross length: 110 cm
pallet gross weight (air): 398.9 kg
pallet gross weight (sea): 398.9 kg
pallet gross width: 120 cm
pallet height (air): 196.7 cm
pallet height (sea): 196.7 cm
power connector: DC-in jack
power consumption (typical): 2.8 W
product colour: Black
product group: Netzwerk-Switches
product type: Gigabit Ethernet Switch
products per pallet (air): 480 pc(s)
products per pallet (sea): 480 pc(s)
products per shipping (inner) case: 10 pc(s)
quality of service (qos) support: Yes
quantity of ports: 8
rack mounting: No
shipping (inner) case gross weight: 7.79 kg
shipping (inner) case height: 44.3 cm
shipping (inner) case length: 37 cm
shipping (inner) case net weight: 7.1 kg
shipping (inner) case width: 26 cm
storage relative humidity (h-h): 5 - 90%
storage temperature (t-t): -10 - 70 °C
store-and-forward: Yes
supported data transfer rates: 10/100/1000 Mbps
switching capacity: 16 Gbit/s
weight: 440 g
width: 138.65 mm
width of packaging (single piece): 160 mm

Description
- Plug and Play operation
- 8 Gigabit Ethernet ports
- Non-blocking architecture: simultaneous full speed on all ports
- Fanless, silent operation to fit in any environment
- Quality of Service (QoS) queues for traffic prioritisation
- Solidly built with metal housing
- Cable diagnostics function to detect faulty network cables
- D-Link Green™ technology, saves energy and increases the product’s lifespan

D-Link’s DGS-108 Gigabit Ethernet switch provides a cost-effective way for SOHO and SMB to create a small network and connect computers, wireless Access Points, IP cameras, network printers and other Ethernet devices quickly and easily without complicated configurations. This switch comes with 8 Gigabit Ethernet ports with an auto-sensing function to detect the maximum speed of the connected devices, allowing you to run your network with the best possible performance. Its fanless design makes the DGS-108 completely silent, ideal for offices, libraries or meeting rooms.

Robust design

The DGS-108 is designed with durability and performance in mind. The sturdy metal housing will protect the switch against accidental harm, while helping to dissipate heat and to reduce stress on internal components. The visible LEDs allow for an easy reading of each port status and speed, helping to troubleshoot connectivity problems. For a convenient placement, the DGS-108 comes with a wall mounting kit and a slot for a Kensington security lock to protect it from theft.

QoS (Quality of Service)

Despite being an unmanaged, Plug and Play switch, the DGS-108 is able to classify network traffic by assessing the 802.1p field in the Ethernet frames, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality.

Cable diagnostics function

The cable diagnostics function enables users to quickly troubleshoot faulty network cables that may lead to transmission errors. At startup, the switch performs a micro-test to assess the quality of the cables connected to its ports. If a fault is detected, the ambar LED will lit up. If the cables pass the test, the green LED will be illuminated, indicating that the network is error-free. This feature can save valuable time when trying to single out a faulty cable that causes problems in the whole network.

Power-saving technology

The DGS-108 is part of D-Link Green™, D-Link’s eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the 802.3az Energy Efficient Ethernet (EEE) standard, which can save a substantial amount of energy by detecting the port status, putting them in low-power, stand-by mode when no network traffic is detected. Additionally, the Green Ethernet™ technology in the DGS-108 can detect the length of the network cables connected to its ports and provide only the right amount of energy required. This helps businesses to save money by reducing their electricity bills with no compromise on performance.