Cart
Your shopping cart is empty! 
Level One LevelOne Switch 5x FE FEP-0511 65W 4xPoE
To purchase this product you must be registered in our system.
Specification
10g support: No
ac input frequency: 50 - 60 Hz
ac input voltage: 100 - 240 V
auto mdi/mdi-x: Yes
auto-negotiation: Yes
basic switching rj-45 ethernet ports quantity: 5
basic switching rj-45 ethernet ports type: Fast Ethernet (10/100)
buffer size: 48 KB
cables included: AC
copper ethernet cabling technology: 10BASE-T, 100BASE-TX
country of origin: Taiwan
depth: 44 mm
flow control support: Yes
full duplex: Yes
harmonized system (hs) code: 85176990
height: 160 mm
input current: 2 A
led indicators: Activity, PoE, Power
mac address table: 1000 entries
master (outer) case gross weight: 12.5 kg
master (outer) case height: 422 mm
master (outer) case length: 252 mm
master (outer) case width: 310 mm
networking standards: IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
operating relative humidity (h-h): 10 - 90%
operating temperature (t-t): 0 - 40 °C
package depth: 80 mm
package height: 235 mm
package type: Box
package weight: 1.1 kg
package width: 145 mm
packet forwarding rate (10 mbps): 14880 pps
packet forwarding rate (100 mbps): 148000 pps
power consumption (typical): 65 W
power over ethernet (poe): Yes
power over ethernet (poe) power per port: 30 W
power over ethernet plus (poe+) ports quantity: 4
power protection features: Over current
product colour: Grey
products per master (outer) case: 10 pc(s)
quick start guide: Yes
storage relative humidity (h-h): 10 - 90%
store-and-forward: Yes
total power over ethernet (poe) budget: 62 W
weight: 800 g
width: 122 mm
Description
| The FEP-0511 is a 5-port 10M/100M Fast Ethernet Switch with one uplink port plus 4 ports of Power over Ethernet capability. Per PoE port is power supply up to 30W. The total PoE power budget is 65W. It is an ideal solution where office and home users utilize a combination of PoE and non-PoE enabled devices. Four ports on the FEP-0511 are PoE enabled making it an ideal solution for most office users that have PoE enabled devices located around the office. These products can include a mixture of PoE IP Phones, PoE wifi APs and PoE IP Cam. It is the perfect answer for offices that are upgrading their office equipment and LAN infrastructure to include PoE capability. The switch automatically detects IEEE 802.3at/af compliant device connected and provides power and data over a single cable to these devices. The FEP-0511 enables users to deploy a stable and reliable high-speed LAN environment, with store-and-forward switching architecture, packet error filtering and non-blocking packet forwarding. The 802.3x and backpressure flow control mechanisms work respectively for full and half duplex modes. This device supports N-way auto-negotiation protocol that automatically detects networking speed and duplex modes. For instant error detection, the FEP-0511 is equipped with a full range of LEDs to help monitor and troubleshoot problems on the network. Key Features - IEEE 802.3af/at PoE compliant to simplify deployment and installation - Auto-detection and protection of non-standard PoE devices - IEEE 802.3x Flow Control protects against lost packets for reliable data transmission - 10/100Mbps, full/half-duplex, auto-negotiation, auto-MDI/MDIX - Internal power supply |
D-Link DGS-1210-48 tīkla pārslēgs Vadīts L2 Gigabit Ethernet (10/100/1000) 1U Melns
Product Code: DGS-1210-48/E
DCP SIA © 2025
Powered By:
