Cart
Your shopping cart is empty! 
Level One LevelOne Switch 8x FE FEP-0800 90W 8xPoE
To purchase this product you must be registered in our system.
Specification
10g support: No
ac adapter included: Yes
ac input frequency: 50 - 60 Hz
ac input voltage: 100 - 240 V
auto mdi/mdi-x: Yes
auto-negotiation: Yes
basic switching rj-45 ethernet ports quantity: 8
basic switching rj-45 ethernet ports type: Fast Ethernet (10/100)
buffer size: 64 KB
certification: FCC, CE, RoHS
copper ethernet cabling technology: 10BASE-T, 100BASE-TX
country of origin: Taiwan
depth: 99 mm
full duplex: Yes
harmonized system (hs) code: 85176990
height: 41 mm
led indicators: Activity, LAN, PoE, Power
mac address table: 1024 entries
manual: Yes
networking standards: IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x
on/off switch: Yes
operating relative humidity (h-h): 10 - 90%
operating temperature (t-t): 0 - 45 °C
output voltage: 56 V
package depth: 230 mm
package height: 82 mm
package type: Box
package weight: 1.6 kg
package width: 371 mm
packet forwarding rate (10 mbps): 14880 pps
packet forwarding rate (100 mbps): 148000 pps
power connector: DC-in jack
power consumption (typical): 90 W
power over ethernet (poe): Yes
power over ethernet (poe) ports quantity: 8
power over ethernet (poe) power per port: 30 W
power protection features: Over current, Short circuit
power supply included: Yes
product colour: Black, Grey
rack mounting: No
stackable: No
storage relative humidity (h-h): 10 - 90%
storage temperature (t-t): -40 - 70 °C
store-and-forward: Yes
switching capacity: 1.6 Gbit/s
total power over ethernet (poe) budget: 85 W
weight: 1.4 kg
width: 165 mm
Description
| FEP-0800 is a 8-port 10/100Mbps Fast Ethernet Switch with Power over Ethernet (PoE) capability. With 8 dip switches, each PoE port can be manually set for On-Off control. FEP-0800 supports up to 30W on each LAN port when the DIP switch is in the ON position . Using a LevelOne PoE repeater, it is possible to extend the connection a further 100 meters, or even daisy-chain several PoE repeaters together for greater distances. Dual 10/100Mbps ports can connect with other edge switches or NVR as uplink ports. - IEEE 802.3x Flow Control protects against lost packets for reliable data transmission - 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - PoE on/off control per port by dip switches - Total PoE power budget: 85W, up to 30W per port - Simple Plug and Play installation |
DCP SIA © 2025
Powered By:
