Zyxel XGS1250-12 12-Port Smart Managed MultiGig Switch

Product Code: XGS1250-12-ZZ0102F
Barcode 4718937634453
Brand: ZYXEL

To purchase this product you must be registered in our system.

 

Specification
10g support: Yes
ac input frequency: 50/60 Hz
ac input voltage: 100 - 240 V
auto mdi/mdi-x: Yes
basic switching rj-45 ethernet ports quantity: 11
basic switching rj-45 ethernet ports type: 10G Ethernet (100/1000/10000)
broadcast storm control: Yes
depth: 104 mm
dhcp features: DHCP client
din rail mounting: No
ethernet lan data rates: 10,100,1000,2500,10000 Mbit/s
flow control support: Yes
forwarding rate: 71.42 Mpps
full duplex: Yes
harmonized system (hs) code: 85176990
height: 27 mm
housing material: Aluminium, Iron
igmp snooping: Yes
jumbo frames: 12000
jumbo frames support: Yes
led indicators: Yes
link aggregation: Yes
mac address table: 16000 entries
mib support: Y
multicast support: Yes
networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
number of fans: 1 fan(s)
operating relative humidity (h-h): 10 - 90%
operating temperature (t-t): 0 - 40 °C
port mirroring: Yes
power connector: DC-in jack
power consumption (max): 20.06 W
power over ethernet (poe): No
power source: AC
power supply included: Yes
product colour: Grey
quality of service (qos) support: Yes
rack mounting: No
redundant fans support: Yes
reset button: Yes
sfp+ module slots quantity: 1
stackable: No
storage relative humidity (h-h): 10 - 90%
storage temperature (t-t): -40 - 70 °C
switch layer: L2
switch type: Managed
switching capacity: 96 Gbit/s
vlan support: Yes
wall mountable: Yes
web-based management: Yes
weight: 783 g
width: 250 mm

Description
Double the 10G Capability!
XS1250-12 features with three Multi-Gigabit ports supporting up to 10G and one additional 10G fiber port on top of the two 10G copper ports provided by the other vendors. With our additional fiber port and 10G connectivity boost the flexibility to adopt more 10G devices in your daily work.

Agile Network Applications
Featured with 1G ports, 10G Multi-Gigabit ports, as well as 10G fiber port, this port combination is capable of servicing a range of network devices such as iMac Pro, 10G NAS, servers, WiFi 6 APs, or new 2.5G motherboards. The unique 5-color LED on the front panel is designed for you to check the link speed instantly.

Why Multi-Gigabit?
Increasing new applications raise the demand for higher network speed requirement. The Multi-Gigabit RJ-45 ports provide more speed options for your network. Before upgrading the network, you should figure out network speed of motherboard, PC, or WiFi 6 AP, and you need to pick up the right network cable to achieve the maximum speed.

Using Your Current Cabling Is Fine!
The Multi-Gigabit support is able to leverage existing Cat 5e cable infrastructure to upgrade network speed up to 5 times for cost efficient network setup.

Whisper-silent, Energy-saving at Work
With the built-in smart fan which is designed to automatically adjust speeds based on the device temperature, you can barely hear the sound while the switch is in operation. Also, you can deactivate the Ethernet port LEDs for distraction-free operation by switching to LED ECO mode through the front panel button* or the web-based interface.