Cart
Your shopping cart is empty! 
Delock 3.5″ USB 3.2 Gen 1 Front Panel 1 x USB Type-C™ + 2 x USB Type-A + SD and Micro SD slot
To purchase this product you must be registered in our system.
Specification
depth: 0.160
height: 0.035
width: 0.150
Description
| This front panel by Delock can be installed into a free 3.5″ bay of a computer. It has two USB 5 Gbps Type-A and one USB 5 Gbps Type-C port. It will be connected to the motherboard internally via a pin header male port. Integrated Card Reader In addition, the hub with integrated card reader expands the PC by an SD and a Micro SD slot. System requirements: • Linux Kernel 3.3 or above • Windows 8.1/8.1-64/10/10-64 • PC with one free 3.5″ bay • Motherboard with a free 19 pin USB 5 Gbps pin header male • Power supply with SATA 15 pin receptacle Specification: • Connectors: external: 1 x USB 5 Gbps USB Type-C™ female 2 x USB 5 Gbps Type-A female 1 x SD slot 1 x Micro SD slot internal: 1 x 19 pin USB pin header female port on the cable 1 x SATA 15 pin power connector • Chipset: VIA VL817, Genesys Logic GL3224 • Data transfer rate up to: SuperSpeed 5 Gbps, Hi-Speed 480 Mbps, Full-Speed 12 Mbps, Low-Speed 1.5 Mbps • The Card Reader supports following memory cards: 1. Slot Secure Digital SD, SD3.0 UHS-I, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC, MMC-I, MMC-II, MMC 4.0, Mini SD, Mini SDHC, MMCmobile, RS-MMC, RS-MMC 4.0 2. Slot Micro Secure Digital MicroSD, Micro SDHC, Micro SDHC Ultra, T-Flash, MMCmicro • Cable data: 1 x 19 pin USB pin header female cable, length ca. 54 cm (without connectors) • 3.5″ metal frame • Colour: black • Hot Swap, Plug & Play Package content: • 3.5″ front panel • USB pin header female cable • Screws • User manual Data sheet: http://www.delock.de/produkt/64058/pdf.html?sprache=en |
DCP SIA © 2025
Powered By:
