Delock Serial Barcode scanner 2D fixed mount - Image scanner

DELOCK

90287

Jauns

This wired serial barcode scanner by Delock can be connected to a device with a free RS-232 interface. With this Image scanner with CMOS image sensor, all common 1D and 2D barcode types can be detected without using any scan button. Furthermore, this fixed mount barcode scanner is able to read barcodes shown on displays and monitors. Even in a completely dark environment, the scanner turns on automatically, when an object appears in its scanning area. There is an additional red LED on top of the scanner indicating the readiness of the scanner for operation and a green LED confirming a positive scan. Depending on your specific requirement, various visual and acoustic signals can be configured and the scan process also be triggered by the appropriate software. The resistant housing protects the scanner from external mechanical influences and prevents the limited ingress of dust and low pressure water jets. With the included mounting brackets, the scanner can be installed variable in different alignments.
System requirements:
• Windows 7/7-32/8.1/8.1-64/10/10-64
• Device with RS-232 interface
Specification:
• Connectors:
  1 x Serial RS-232 DB9 female with screws
  1 x 5 V DC jack
• Resolution:
  Code 39: 0.127 mm
  QR Code: 0.169 mm
• Trigger: automatic, software
• Reading distance: ca. 45 mm bis 285 mm
• Light source: LED, 625 nm
• Light colour: visible LED red
• Aimer: Laser Class 1,  650 nm, red
• Sensor: CMOS image sensor
• Scan rate: up to 60 frames per second
• Scan angle:
  horizontal: 36°
  vertical: 23°
• Surrounding brightness: max. 30000 Lux
• Input voltage: 5 V
• Power supply via pin 9 on the RS-232 port or via DC jack
• Current consumption:
  operation: max. 320 mA
  standby: max. 100 mA
• Operating temperature: -10 °C ~ 55 °C
• Storage temperature: -20 °C ~ 65 °C
• Relative humidity: 0 - 95 % (non condensing)
• Protection class: IP55
• Colour: black
• Weight:
  Barcode scanner: ca. 85 g
  Mounting brackets: ca. 15 g
• Dimensions (LxWxH): ca. 56 x 41 x 20 mm
• Cable length: ca. 85.9 cm
• Software:
  EzUtility Software (standard mode/automatic Trigger)
  BEO Software (command mode/software Trigger)
• Scancodes:
  1D Codes:
  UPC-A / UPC-E
  EAN-8 / EAN-13
  Matrix 2 of 5
  China Postal Code (Toshiba Code)
  Industrial 2 of 5
  Interleaved 2 of 5
  Codabar
  Code 11
  Code 32
  Standard Code 39
  Full ASCII Code 39
  Code 93
  Code 128
  EAN / UCC 128
  MSI Plessey Code
  UK Plessey Code
  Telepen Code
  GS1 Databar
  IATA Code
  2D Codes:
  PDF417
  DataMatrix
  QR Code
  Micro QR Code
  Chinese Sensible Code
Package content:
• Barcode scanner
• 1 x mounting bracket 90°
• 1 x mounting bracket 60°
• 2 x screw
• User manual
Data sheet:
http://www.delock.de/produkt/90287/pdf.html?sprache=en

Skeneri

Accept Site use cookies