FROGBLUE

Frogblue 5-Kanal Kleinspannungseingang, frog Contact 5

Product Code: C5-SPC.01
Barcode 4260578530064

To purchase this product you must be registered in our system.

 

Specification
bluetooth: ja
colour: green
comfort and time function: ja
current catalog edition: 24.1
depth: 21 mm
depth of packaging (single piece): 90 mm
gross weight: 0.047
height: 53 mm
height of packaging (single piece): 40 mm
integrated configuration backup: ja
integrated logic module: ja
manufacturer: Frogblue
operating temperature max.: 65 °C
operating temperature min.: -25 °C
outputs dimmable: entfällt
package weight (single piece): 0.047 kg
power measurement: entfällt
product group: Smarthome
product type: Smarthome Zubehör
short circuit detection and indication: entfällt
technical particularity: Einbau und Montage elektrischer Geräte dürfen nur durch E...
weight: 0.045 kg
width: 48 mm
width of packaging (single piece): 80 mm

Description

Multifunktionales 5-Kanal-Kontaktmodul zur Abfrage von Niederspannungskontakten bis zu 100 Metern ohne zusätzliche Leistung. 5 Eingänge in 3 galvanischen Schaltkreisen. Mit integriertem Logikmodul, Komfort- und Timerfunktionen.

  • Anschlussvarianten Magnetkontakt, Fensterkontakt, Mikroschalter etc.
  • Anschlussart Federsteckklemme
  • Schutzart IP20
  • Netzspannung AC 110-240 V~
  • Stand-by-Verbrauch < 190 mW
  • Bluetooth 4.2 Low Energy
  • Funk-Freifeldreichweite 30 Meter
  • Umgebungstemparatur -25°C bis +65°C
frogContact5

System Information

This appliance is a product of the frogblue system. Detailed technical knowledge through frogblue training is required. The function of the device is software dependent. Detailed information about software versions and the respective range of functions can be found on the website of frogblue. Technical descriptions, further detailed instructions as well as instructions for proper disposal are included in the manual, which is available on the frogblue website. Commissioning and configuration is done with the frogblue App.

Safety Instructions

Installation and assembly of electrical devices may only be carried out by qualified electricians. Non-observance of the instructions may cause damage to the device, fire or other hazards! Risk of electric shock. The appliance is not suitable for disconnecting. Even when the device is switched off, the load is not electrically isolated from the mains. Before working on the appliance or replacing lamps, disconnect the mains voltage and switch off the automatic circuit breaker. Country-specific regulations must be observed.