Cart
Your shopping cart is empty! 
Intellinet Gigabit Ultra PoE-Injektor 1x95W
To purchase this product you must be registered in our system.
Specification
ac adapter frequency: 50 - 60 Hz
ac adapter input voltage: 100 - 240 V
cable types supported: Cat5, Cat5e
certification: CE, FCC A
compliance certificates: RoHS
depth: 190 mm
ethernet interface type: Gigabit Ethernet
ethernet lan (rj-45) ports: 2
ethernet lan data rates: 10,100,1000 Mbit/s
harmonized system (hs) code: 85044095
height: 40 mm
led indicators: Data, PoE, Power
maximum operating distance: 100 m
networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3u
number of products included: 1 pc(s)
operating relative humidity (h-h): 10 - 90%
operating temperature (t-t): 32 - 104 °F
power cord included: Yes
power over ethernet (poe): Yes
power protection features: Over current, Over voltage, Short circuit
product colour: Black, Grey
quick installation guide: Yes
storage temperature (t-t): -40 - 70 °C
total power over ethernet (poe) budget: 95 W
wall mountable: Yes
weight: 502 g
width: 100 mm
Description
| Inject 95 Watts of Power Into Your Internet of Things (IoT) or PoE Network! IEEE 802.3bt Compatible The Intellinet Network Solutions Gigabit Ultra PoE Injector provides up to 95 W using all four pairs of twisted-pair network cabling to support IoT applications such as lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Point-of-sale card readers & printers need up to 60 watts. Lighting fixtures and controllers require 40 to 50 watts. Some motorized IP cameras need more than 70 watts. The IEEE 802.3bt Ultra PoE standard is an excellent solution for bringing power to these critical systems. As many new IEEE 802.3bt powered devices enter the market, you'll be ready for them with an Intellinet Network Solutions Gigabit Ultra PoE Injector. Full Compatibility with Existing IEEE 802.3af/at PoE Powered Devices The Intellinet Network Solutions Gigabit Ultra PoE Injector helps you connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. Reduced Wiring Costs It's no longer necessary to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing network cabling to deliver DC power as well as transfer data. Protected Equipment Once DC power is connected to your networked equipment through the network cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power problems like short circuits (short GRND), current overloads and high voltages. |
DCP SIA © 2026
Powered By:
