DIGITUS

Digitus 3-Port MST Video Hub (USB-C? -> 3x DisplayPort)

Product Code: DS-45334
Barcode 4016032482109

To purchase this product you must be registered in our system.

 

Specification
country of origin: CN
depth: 0.190
height: 0.020
height(cm): 16
length(cm): 2
volume(cm3): 256
weight(kg): 0.09265
width: 0.080
width(cm): 8

Description
USB-C - 3x DP MST Video Hub DP 1.4, 4K/60Hz

MST Hub for connection of up to 3 external monitors via a video output on the notebook/PC - Increase your productivity with multiple screens

Supports DP 1.4 (Alt mode) with maximum 8.1 Gbps per channel, max. 32.4 Gbps on 4 channels
Supports Windows OS (11, 10)
Resolutions 3 external monitors - MST mode: max. 1x 4K/60Hz + 2x 4K/30Hz
Resolutions 2 external monitors - MST mode: max. 2x 4K/60Hz
Power supply via a USB-C™ connection - BUS powered
No driver or software required - Configuration via the display settings in Windows OS
Supports 3 display modes: Mirror (1 signal mirrored on 3 displays), extend (3 signals on 3 displays), distribute (1 signal distributed across 3 displays)
Supports HDCP 2.2 / 1.4 as well as HDR (High Dynamic Range)
Supports MST (Multi Stream Transport) & SST - Single Stream Transport

The DIGITUS® MST Hub uses Multi Stream Transport (DisplayPort™ 1.2 function), which allows multiple AV signals to be transported over a single cable. This enables the use of multiple monitors that are connected via the MST Hub configuration. The MST Hub can distribute different video streams to the three connected screens. In general, it supports three reproduction modes: Mirror (1 signal mirrored on 3 displays), extend (3 signals on 3 displays), distribute (1 signal distributed across 3 displays).

Audio: false
1x USB-C™ input
3x DisplayPort output
Supports DP 1.4 (Alt mode) with maximum 8.1 Gbps per channel, max. 32.4 Gbps on 4 channels
Supports Windows OS (11, 10)
Resolutions 3 external monitors - MST mode: max. 1x 4K/60Hz + 2x 4K/30Hz
Resolutions 2 external monitors - MST mode: max. 2x 4K/60Hz
Power supply via a USB-C™ connection - BUS powered
No driver or software required - Configuration via the display settings in Windows OS
Supports 3 display modes: Mirror (1 signal mirrored on 3 displays), extend (3 signals on 3 displays), distribute (1 signal distributed across 3 displays)
HDCP 2.2 & 1.4
Supports HDR (High Dynamic Range)
Supports MST (Multi Stream Transport) & SST - Single Stream Transport
Housing: ABS
Operating temperature: 0-45 °
Standby power consumption: approx. 1W
Dimensions: L 25.2 x W 3.6 x H 1.15 cm
Weight: 51 g
Color: Black
Note:
To achieve the resolutions stated above, the host PC should support DP 1.4 (Alt mode). If your PC only supports DP 1.2, the corresponding resolutions are reduced due to the bandwidth restriction
The resolution combinations stated above are a theoretical reference, the actual resolutions depend from the connected host PC as well as the display
In order to use the full scope of features, make sure that your device (graphics card) uses DP 1.4.
If you use a DisplayPort 1.1 graphics card, the MST Hub acts as a splitter and mirrors your video source on all displays
Functionality can be restricted depending on the specifications of your device and operating system
MST Hubs cannot increase the number of screens supported by a graphics card. Every graphics card has a limited number of screens that it can support. Please check your specifications in advance.
Requires at least a host system with DP 1.2/HBR2/MST or higher (recommended)
Supports AMD, Nvidia and Intel graphics cards

Package content:
1x MST Video Hub (USB-C™ -> 3x DisplayPort)
1x QIG