Value

Value S/FTP Cable Cat.8 (Class I), Solid Wire, LSOH, 100 m, grey, 100 m

Product Code: 21.99.1800
Barcode 7630049627550

To purchase this product you must be registered in our system.

 

Specification
bend radius: 60mm
cable lsoh: yes
colour: grey
colour (cable): grey
conductor cross section (awg): AWG 22
conductor type: Solid wire
contents: 100 m
current catalog edition: C25-01.38
current catalog page: 1.38
depth of packaging (single piece): 300 mm
external cable diameter: 7.50mm
fire protection class: Dca
gross weight: 8
height of packaging (single piece): 300 mm
impedance: 100 Ohm
length: 100 m
length: 100 m
manufacturer: VALUE
material (external cable mantle): LSOH
operating temperature max.: 75 °C
operating temperature min.: -20 °C
package weight (single piece): 8 kg
product group: Twisted Pair Cable
product type: Installation cable
quantity of wires: 8
shield type: SFTP
transfer quality: Cat8.1 / Class I
weight: 7363 g
width of packaging (single piece): 250 mm

Description

Category 8, the standard for next-generation twisted-pair cabling, enables up to four times faster data transfer on the same cabling type and supports 25GBASE-T and 40GBASE-T short distance applications. Our Cat. 8 cables are halogen-free and flame-retardant (LSOH).

  • 100 meter / box
  • Impedance: 100 Ohm
  • Construction:
- 8 lines, solid copper wire, AWG22
- pairs shielded with aluminium foil
- complete shielding in AL-MG braid
  • Colour: grey
  • CPR-Dca-S2,d1,a1

For a Cat.8 channel link S/FTP Cabling we recommend to use the following components:
21.99.1800 VALUE S/FTP Cable, Cat.8, Solid Wire, AWG22
21.99.1807 VALUE Cat.8 RJ45 Keystone, Jack, toolless
21.99.1804 VALUE Cat.8 Shielded Field Connector RJ45 plug
21.99.1801 to 21.99.1803 VALUE S/FTP Patch Cable Stranded Cat.8, grey (1m to 3m)

The advantages of Category 8 cabling:
- Category 8 offers four times the bandwidth of Category 6A cabling, specified up to 2 GHz.
- Category 8 cables are shielded, though shielded cabling systems must be grounded, this is also not an issue in most data center, since the connections are closer together.
- Category 8 connectors use the familiar RJ45 interface. The jacks require proper grounding to the cable and to the device they are installed into (patch panel or outlet), therefore they are designed for field termination.
- Category 8 number of connectors is limited to two connectors in the copper channel (excluding connections on end equipment), this is typically adequate in a data center environment and many common enterprise links.
- Maximum reach: 30 meter of channel (maximum 24m link cable + 2x 3m patch cables).