Cart
Your shopping cart is empty! Delock 2.5 Konverter SATA Express U.2 1 x M.2 1 x mSATA mit Gehäuse 9,5 mm
To purchase this product you must be registered in our system.
This Delock M.2 converter enables two different usage applications. 1. One M.2 PCIe SSD in 2280, 2260, 2242 and 2230 format can be connected and used as a replacement for a 2.5″ HDD. The converter can be installed into the system internally through the U.2 68 pin interface. 2. One M.2 SATA SSD in 2280, 2260, 2242 and 2230 format and one mSATA SSD can be connected and used as a replacement for a 2.5″ HDD. The converter can be installed into the system internally through the SATA Express interface. System requirements: • Linux Kernel 3.3 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • A free SATA Express interface (for SATA M.2 and mSATA) or • A free U.2 interface (for PCIe M.2) or • A free SFF-8643 interface (for PCIe M.2) Specification: • Connectors: 1 x U.2 SFF-8639 / SATA Express male > 1 x 67 pin M.2 key M slot 1 x mSATA slot (half size / full size) • Interface: PCIe / SATA • Form factor: 2.5″ • Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key M or key B+M based on SATA or PCIe • Maximum height of the components on the module: 1.35 mm, application of double- sided assembled modules supported • Supports NVM Express (NVMe) (only PCIe SSD) • Maximum power for modules: 3 A • Short circuit protection, over heating protection • ESD protection up to 2 kV • LED indicator • Dimensions (LxWxH): ca. 100 x 70 x 9.5 mm Package content: • Converter • 2.5″ enclosure • Fixing screws for M.2 and mSATA module, screws for enclosure • User manual Data sheet: http://www.delock.de/produkt/62786/pdf.html?sprache=en |