Enhanced Power Loss Data Protection Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.
Hardware Encryption Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.
End-to-End Data Protection End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.
Temperature Monitoring and Logging Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.
SSD form factor
2.5"
SSD capacity
3.84 TB
Interface
Serial ATA III
Memory type
TLC 3D NAND
NVMe
Nē
Component for
Server/workstation
Hardware encryption
Jā
Security algorithms
256-bit AES
Data transfer rate
6 Gbit/s
Read speed
550 MB/s
Write speed
510 MB/s
Random read (4KB)
92000 IOPS
Random write (4KB)
31000 IOPS
Random read (100% span)
92000 IOPS
Random write (100% span)
31000 IOPS
Random latency - read (up to)
104 µs
Random latency - write (up to)
57 µs
Sequential latency - read (up to)
37 µs
Sequential latency - write (up to)
40 µs
End-to-End Data Protection
Jā
Enhanced Power Loss Data Protection technology
Jā
SSD temperature monitoring
Jā
Uncorrectable Bit Error Rate (UBER)
< 1 per 10^17 bits read
Mean time between failures (MTBF)
2000000 h
Export Control Classification Number (ECCN)
5A992C
Commodity Classification Automated Tracking System (CCATS)