Cart
Your shopping cart is empty! Digitus Gigabit Ethernet PoE+ Splitter, 802.3at, 24 W
To purchase this product you must be registered in our system.
Gigabit Ethernet PoE+ Splitter, 802.3at Output: 5V/2A, 9V/2A, 12V/2A, 24W Integrates Power over Ethernet technology to older non PoE network devices Gigabit Ethernet Speed Fanless design ensures a quiet operation Requires no external power supply unit Adjustable output 5V/2A , 9V/2A, 12V/2A Support 5.5mm and 3.5mm power jack The DIGITUS PoE Splitter provide data and power via a single Ethernet Cable to devices, which are not supporting Power over Ethernet. Just connect the input of the Splitter to a PoE Switch or a PoE Injector and the output side to a non-PoE network device such as an access point, IP Phone or a Camera to provide Power and Data. The Extender is self powered by PoE, so there is no additional power supply needed. The output voltage can be regulated via a dip switch to 5V , 9V or 12V. So this Splitter expand your network where you wish to place network device where are no power outlets available. PoE standard: IEEE802.3at (PoE+) Ethernet speed: Gigabit Power output: 24 W Industrial usage: false Ethernet Speed: 10/100/1000Mbps Gigabit Half/Full Duplex PoE Standard: IEEE802.3at Input: Power + Data In (RJ45) Output: Data Out (RJ45) , DC Out Plug-and-Play Installation - No configuration necessary Adjustable output 5V/2A , 9V/2A, 12V/2A Splits the 48VDC power over RJ45 Ethernet cable into different DC output Status LED on the device (PoE ready/ PoE in-use) Circuit isolation protection Maximum power output up to 24 watts Support wide input voltage range 34VDC to 57VDC Thermal cut off Operating Temperature: 0 to 40°C Dimensions (L x W x H): 80 x 55 x 23 mm Weight: 80g Colour: black Package content: Gigabit PoE Splitter Manual RJ45 Ethernet cable DC power cable {DE mau}: 3,5mm Stromadapter |