Cart
Your shopping cart is empty! 
Level One LevelOne Konverter IEC-2000 10/100TX>100FX 2km
To purchase this product you must be registered in our system.
Specification
auto mdi/mdi-x: Yes
auto-negotiation: Yes
certification: - ISO9001
- FCC Part 15, Class A
- EN61000-6-3
- EN55022
- EN61000-3-2
- EN61000-3-3
- EN61000-6-2
- EN61000-4-2
- EN61000-4-3
- EN61000-4-4
- EN61000-4-5
- EN61000-4-6
- EN61000-4-8
- IEC60068-2-6 Fc
- IEC60068-2-27 Ea
- FED STD 101C Method 5007.1
connectivity technology: Wired
converter input interface: 10Base-T, 100Base-TX, 1000Base-TX
converter output interface: 1000Base-LX, 1000Base-SX
country of origin: Taiwan
depth: 110 mm
din rail mounting: Yes
duplex system: Full, Half
ethernet interface type: Gigabit Ethernet
ethernet lan (rj-45) ports: 1
ethernet lan data rates: 10,100,1000 Mbit/s
fiber optic connector: SFP
fiber ports quantity: 1
harmonized system (hs) code: 85176990
height: 135 mm
housing material: Aluminium
input voltage: 12 - 48 V
internal: No
international protection (ip) code: IP30
led indicators: Activity, Link, Power, Status
maximum data transfer rate: 1000 Mbit/s
mean time between failures (mtbf): 665760 h
networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
operating relative humidity (h-h): 5 - 95%
operating temperature (t-t): -40 - 75 °C
output current (48v): 0.16 A
package depth: 92 mm
package height: 236 mm
package type: Box
package weight: 1 kg
package width: 198 mm
packet forwarding rate (1 gbps): 1488100 pps
power consumption (max): 7.68 W
product colour: Black
quick installation guide: Yes
safety: UL508
storage temperature (t-t): -40 - 85 °C
weight: 800 g
width: 50 mm
Description
| LevelOne IEC-2000 is an industrial Gigabit Ethernet media converter with a rugged aluminum case which providing superb heat dissipation. This converter is designed to be mounted on an industrial standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity. It also features Link Fault Pass Through in order to alert remote location when link status changes. Fault Detection Relay contact sends alert signal when the power failed or a port link disconnected, therefore the system operator can respond quickly. This relay contact can be easily configured with a simple DIP switch. Transportation Application Complies with NEMA (National Manufacturers Association) TS1 & TS2 Environmental certified for the Traffic Control Equipment that withstand extreme temperatures, operating voltage and humidity fluctuation, vibration and shock commonly experienced in severe outdoor environments. High Reliability All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. - Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment - Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment - SFP slot supports pluggable Gigabit optic modules that enabling you to choose from a variety of transceiver - DIP switch configuration for "Link-Fault-Pass-Through," link down alarm, speed, duplex mode - 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX - Full wire-speed forwarding rate - Alarms for power and port link failure by relay output - 40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F) - IP30 aluminum case - Supports DIN-rail installation |
DCP SIA © 2025
Powered By:
