Cart
Your shopping cart is empty! 
D-Link DEM-432XT tīkla raiduztvērēja modulis Optiskā škiedra 10000 Mbit/s SFP+ 1310 nm
To purchase this product you must be registered in our system.
Specification
certification: CE, FCC, VCCI, MSA
compliance certificates: RoHS
depth: 11.8 mm
duplex system: Full
fiber cable diameters supported (core/cladding): 9/125 µm
fiber ethernet cabling technology: 10GBASE
fiber optic connector: LC
harmonized system (hs) code: 85369010
height: 56.5 mm
hot-plug support: Yes
interface type: SFP+
link budget: 10.1 dB
master (outer) cases per pallet (air): 60 pc(s)
master (outer) cases per pallet (sea): 60 pc(s)
maximum current: 300 A
maximum data transfer rate: 10000 Mbit/s
maximum transfer distance: 10000 m
maximum voltage: 3.3 V
mean time between failures (mtbf): 4650000 h
multi-mode fiber (mmf) supported: No
networking standards: IEEE 802.3ae
operating relative humidity (h-h): 5 - 85%
operating temperature (t-t): 0 - 70 °C
package depth: 131 mm
package height: 49 mm
package weight: 64 g
package width: 74 mm
pallet gross length: 102 cm
pallet gross weight (air): 272 kg
pallet gross weight (sea): 272 kg
pallet gross width: 122 cm
pallet height (air): 199 cm
pallet height (sea): 199 cm
product colour: Gold, Metallic
products per pallet (air): 3000 pc(s)
products per pallet (sea): 3000 pc(s)
products per shipping (inner) case: 50 pc(s)
rx power (max): 0.5 dBmW
rx power (min): -12.6 dBmW
safety: UL, TUV, CDRH
sfp transceiver standard: LR
sfp transceiver type: Fiber optic
shipping (inner) case gross weight: 4.2 kg
shipping (inner) case height: 31 cm
shipping (inner) case length: 36 cm
shipping (inner) case net weight: 3.2 kg
shipping (inner) case width: 26 cm
single-mode fiber (smf) supported: Yes
storage relative humidity (h-h): 5 - 95%
storage temperature (t-t): -40 - 85 °C
tx power (max): 0.5 dBmW
tx power (min): -8.5 dBmW
wavelength: 1310 nm
weight: 19.5 g
width: 14.8 mm
Description
| D-Link’s 10G SFP+ Module series are hot-swappable SFP+ transceivers that plug into SFP+ slots on switches and support 10G Ethernet. The D-Link 10GBASE SFP+ Module Series transceivers offer customers a wide variety of 10G Ethernet connectivity options for data centers, enterprise wiring closets, and service provider transport applications. Enhanced Small Form-factor Pluggable Format The transceivers use the Enhanced Small Formfactor Pluggable format (SFP+). The SFP+ form factor is smaller than other form factors such as Xenpak, X2, and 10G XFP, ensuring lower costs, lower power disruption, and higher port density. They provide the necessary signal amplification for data to be transmitted to the network cable from the port, and vice versa, for the port to receive data from the network cable. Hot Pluggable All D-Link transceivers are hot-pluggable. You can connect a transceiver while the system is powered on without causing any problems. This permits modules to be added or removed without interrupting the network. 10G Ethernet speeds The transceivers all support 10G Ethernet, which results in very fast data transmissions of up to 10 Gbit/s. This is 10 times faster than Gigabit Ethernet and enables the switch to handle faster and higher data transmissions, making it very suitable for business needs. |
Level One LevelOne SFP-2505 tīkla raiduztvērēja modulis Optiskā škiedra 2500 Mbit/s 1550 nm
Product Code: SFP-2505
Level One LevelOne SFP-2506 tīkla raiduztvērēja modulis Optiskā škiedra 2500 Mbit/s 1550 nm
Product Code: SFP-2506
DCP SIA © 2025
Powered By:
