LEVEL ONE

Level One LevelOne SFP-3711 tīkla raiduztvērēja modulis Optiskā škiedra 1250 Mbit/s 1550 nm

Product Code: SFP-3711
Barcode 4015867154694

To purchase this product you must be registered in our system.

 

Specification
certification: CE, FCC
compliance certificates: RoHS
depth: 12 mm
duplex system: Full
fiber cable diameters supported (core/cladding): 9/125 µm
fiber optic connector: LC
fiber ports quantity: 1
harmonized system (hs) code: 85369010
height: 13.7 mm
hot-swap: Yes
input voltage: 3.3 V
interface type: SFP
maximum current: 0.3 A
maximum data transfer rate: 1250 Mbit/s
maximum transfer distance: 120000 m
maximum voltage: 6 V
networking standards: IEEE 802.3z
operating relative humidity (h-h): 5 - 95%
operating temperature (t-t): 0 - 70 °C
package depth: 20 mm
package height: 65 mm
package weight: 35 g
package width: 106 mm
plug and play: Yes
quantity per pack: 1 pc(s)
safety: EN 60825-1
sfp transceiver type: Fiber optic
single-mode fiber (smf) supported: Yes
storage temperature (t-t): -40 - 85 °C
tx power (max): 5 dBmW
tx power (min): 0 dBmW
wavelength: 1550 nm
weight: 20 g
width: 57 mm

Description
LevelOne SFP-3711 is a high performance and cost-effective single-mode SFP transceiver. Intended for use with Gigabit Ethernet, it provides up to 1.25 Gbps bi-directional data transfer rate on a single duplex fiber core. For use with 9 micron fiber cables, it has increased transmission power to reach a distance of up to 120km. The SFP-3711 transceiver operates using a wavelength of 1550nm with a DFB Laser Diode light source and has a LC connector.

- 1550nm DFB LD
- APD Receiver
- Data Rate: 1.25Gbps, NRZ
- Single +3.3V Power Supply
- RoHS Compliant and Lead-free
- AC/AC Differential Electrical Interface
- Compliant with Multi-Source Agreement (MSA)
- Small Form Factor Pluggable (SFP)
- Duplex LC Connector
- Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25Gbps
- Compliance with ANSI specifications for Fiber
- Channel applications at 1.06bps
- No configuration or installation software required
- Eye Safety Designed to meet LASER Class 1 comply with EN60825-1