Cart
Your shopping cart is empty! 
Digitus Industrial Gigabit Ethernet PoE+ Injector, 802.3 af/at, 60 W
To purchase this product you must be registered in our system.
Specification
country of origin: CN
depth: 0.168
height: 0.052
height(cm): 5
length(cm): 16.5
volume(cm3): 1031.25
weight(kg): 0.41
width: 0.125
width(cm): 12.5
Description
| Industrial Gigabit PoE+ Injector 802.3at 60W power output, DIN rail and wall mount design, High Power output with 60 watts Industrial Gigabit PoE+ Injector 802.3 af/at Meets the 802.3af/at PoE standard 48~55V output voltage, 60W The Digitus PoE Injector allows you to minimize cabling during installation of PoE-ready devices such as IP network cameras. Data supply and power supply to the devices is accomplished using a single Ethernet cable. This makes laying a separate power cable unnecessary and allows you to extend your network to places where there are no outlets or power cables. The Injector is fully compliant with the IEEE802.3at Ultra PoE standard and delivers an output power of 60 W. PoE Power budget: 60 W PoE standard: IEEE802.3at (PoE+) Ethernet speed: Gigabit Power output: Depending on power supply Industrial usage: true Installation type: DIN rail Managed: false Outdoorsuitable: false PoE (Power over Ethernet): true Protection against vanadlism: false VLAN: false Meets the 802.3af/at PoE standard 45~56 volt output voltage, 60 watts RJ45 LAN input LAN (RJ45) output, power supply via pin: 4/5(+), 7/8(-) and 3/6(+), 1/2(-) Cable connection: 10/100/1000 Mbps The output has a current limit, a short-circuit protection and an automatic terminal device detection and classification Power consumption: 3W max. Operating temperature: -40°C - 75°C Less than 0.3W idle consumption Compact, robust metal housing Excellent short circuit protection Lightning and overvoltage protection DIN rail (top hat rail) and wall mounting possible Package content: Industrial Gigabit PoE+ Injector 802.3 af/at Quick start guide |
DCP SIA © 2025
Powered By:
