Cart
Your shopping cart is empty! 
Digitus Industrial 5-Port Gigabit PoE Extender
To purchase this product you must be registered in our system.
Specification
country of origin: TW
depth: 0.210
height: 0.065
height(cm): 6.4
length(cm): 16.2
volume(cm3): 2187.65
weight(kg): 0.54375
width: 0.165
width(cm): 21.1
Description
| Industrial 5-Port Gigabit PoE Extender 1-Port 802.3bt PoE to 4-port 802.3af/at Industrial 5-Port Gigabit PoE Extender with 1-Port 802.3bt PoE to 4-port 802.3af/at Operating temp.: -40°C to +75°C 5-Port 10/100/1000BASE-T Gigabit RJ45 Interface Thunder, Lightning resistant Built-in hardened PoE and PD controller Can be cascaded up to 4 units or 500meters Works in extreme environment -40°C to +75°C Data Processing: Store and Forward Flow Control: IEEE 802.3x Flow Control and Back Pressure Jumbo Frame: 9KB This PoE extender is equipped with 1 PD input to power up 4 Giga PSE output. It can be used as a standalone PD/PSE PoE injector or to extend PoE distance. It can be cascaded up to 4 units or 500 meters to deliver high power for your end device. Industrial usage: false Managed: false Outdoorsuitable: false PoE (Power over Ethernet): false Protection against vanadlism: false VLAN: false IEEE Standard: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Fast Ethernet, IEEE 802.3ab 1000Base-T Gigabit Ethernet, IEEE 802.3x Flow Control and Back Pressure, IEEE 802.3af PoE, IEEE 802.3at PoE+, IEEE 802.3bt PoE++ Switch Architecture: Back-plane (Switching Fabric): 10Gbps Data Processing: Store and Forward Flow Control: IEEE 802.3x Flow Control and Back Pressure Jumbo Frame: 9KB MAC address Table Size: 2K Packet Buffer Size: 1Mbits Network Connector: 5 x RJ-45 10/100/1000M auto negotiation, 1 x RJ-45 10/100/1000M with IEEE802.3bt In, 4 x RJ-45 10/100/1000M with IEEE802.3at Out Auto MDI/MDI-X function, Full/Half duplex Network Cable: UTP/STP Cat.5e or above Cable, EIA/TIA-568 (100m) Protocol; CSMA/CD LED:bt (Green):ON-PoE IEEE 802.3bt is detected, OFF-PoE IEEE 802.3bt is not detected, PWR (Amber):, ON-Power is detected, OFF-Power is not detected, PoE (Amber): ON-PSE is activated and PD is detected LNK/ACT (Green):ON-TX port is detected, Flashing-TX data is transmitting/receiving Reserve polarity protection: Present Overload current protection: Present Power Consumption: 3.9W without PoE load PD power input: 30W/60W/90W PoE Power: Maximum total PSE power output 60W Operating Temperature: -40°C to 75°C Operating Humidity: 5% to 95% (Non-condensing) Storage Temperature: -40°C to 85°C Housing: Rugged Metal, IP30 Case Dimension (L x W x D): 103.5 x 32 x 81.5 mm Installation mounting: DIN Rail Mount or Wall Mount Package content: 1x PoE Extender 1 x Mounting Material 1 x Manual |
DCP SIA © 2025
Powered By:
