Netgear MS510TXM tīkla pārslēgs Vadīts L2/L3/L4 10G Ethernet (100/1000/10000) Pelēks, Zils

Product Code: MS510TXM-100EUS
Barcode 0606449152364

To purchase this product you must be registered in our system.

 

Specification
10g support: Yes
access control list (acl): Yes
access control list (acl) ingress: 100
basic switching rj-45 ethernet ports quantity: 8
basic switching rj-45 ethernet ports type: 10G Ethernet (100/1000/10000)
broadcast storm control: Yes
built-in processor: Yes
cloud-managed: Yes
copper ethernet cabling technology: 1000BASE-T
depth: 206 mm
dhcp features: DHCP client, DHCP server
ethernet lan data rates: 100,1000,2500,5000,10000 Mbit/s
flash memory: 64 MB
flow control support: Yes
full duplex: Yes
height: 43 mm
igmp snooping: Yes
internal memory: 256 MB
jumbo frames: 10000
jumbo frames support: Yes
led indicators: Activity, Power, Speed
link aggregation: Yes
loop protection: Yes
mac address table: 32000 entries
management protocols: SNMP v1/v2c,SNMP v3
manufacturer: NETGEAR
multicast support: Yes
networking standards: IEEE 802.1D, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad, IEEE 802.3x
non-operating altitude: 0 - 3000 m
number of vlans: 256
operating altitude: 0 - 3000 m
operating relative humidity (h-h): 0 - 95%
operating temperature (t-t): 0 - 50 °C
port mirroring: Yes
power over ethernet (poe): No
power supply included: Yes
processor frequency: 1000 MHz
product colour: Grey, Blue
product type: Network Switches
quality of service (qos) support: Yes
rack mounting: Yes
security algorithms: HTTPS, SSL/TLS
sfp+ module slots quantity: 2
spanning tree protocol: Yes
storage relative humidity (h-h): 0 - 95%
storage temperature (t-t): -20 - 70 °C
switch layer: L2/L3/L4
switch type: Managed
switching capacity: 140 Gbit/s
vlan support: Yes
web-based management: Yes
width: 330 mm

Description
The NETGEAR® MS510TXM 8-Port Multi-Gigabit/10G Smart Managed Pro Switch offers 4 ports 1G/2.5G and 4 ports multi-Gig/10G with 2 dedicated 10 Gigabit fiber ports for WiFi 6 AP connectivity, IP surveillance and mobility. It is the ideal companion to the NETGEAR WAX610PA WiFi 6 Access Point that features a 2.5G Ethernet port and a power adapter.

MS510TXM provides four auto-adapt multispeed Gigabit RJ-45 ports that support 2.5G, and 1G; another four multi-speed Gigabit RJ-45 ports that support 10G, 5G, 2.5G and 1G, and two dedicated SFP+ fiber uplink port that supports 10G and 1G. Each of the 5 Multi-Gig Ethernet ports automatically detects which speed is needed by the connected device and provides the adequate connection speed.