Cart
Your shopping cart is empty! 
Conceptronic Ladegerät 4Port 100W,3xUSB-C,1xUSB-A 1.5m ws
To purchase this product you must be registered in our system.
Specification
cable length: 1.5 m
cables included: USB Type-C
charger compatibility: Universal
charger type: Indoor
country of origin: China
depth: 65 mm
fast charging: Yes
fast charging technology: Power Delivery 3.0, Quick Charge 3.0
gallium nitride (gan) transistors: Yes
harmonized system (hs) code: 8504408390
height: 32 mm
input current: 2.5 A
input frequency: 50 - 60 Hz
input voltage: 100 - 240 V
manual: Yes
master (outer) case gross weight: 12.6 kg
master (outer) case height: 320 mm
master (outer) case length: 292 mm
master (outer) case width: 385 mm
maximum output voltage: 20 V
maximum power: 100 W
minimum output voltage: 3.3 V
number of simultaneously connected devices (max): 4
operating relative humidity (h-h): 20 - 80%
operating temperature (t-t): 0 - 35 °C
output current (12v): 3 A
output current (15v): 3 A
output current (20v): 5 A
output current (5v): 3 A
output current (9v): 3 A
package depth: 36 mm
package height: 136 mm
package type: Box
package weight: 136 g
package width: 153 mm
pallet gross height: 148 cm
pallet gross length: 80 cm
pallet gross width: 120 cm
power protection features: Overheating, Overload, Short circuit
power source type: AC
product colour: White
products per master (outer) case: 40 pc(s)
storage relative humidity (h-h): 10 - 90%
storage temperature (t-t): -20 - 80 °C
sustainability compliance: Yes
usb 3.2 gen 1 (3.1 gen 1) type-a ports quantity: 1
usb power delivery (usb pd): Yes
usb power delivery revision: 3.0
usb type-c ports quantity: 3
weight: 204 g
width: 65 mm
Description
This charger harnesses cutting-edge Gallium Nitride (GaN) technology to deliver up to 100W of total power, ensuring exceptionally fast and efficient charging. It features a versatile port selection with 4 ports: 3 USB-C ports supporting Power Delivery (PD) 3.0 and 1 USB-A port with Quick Charge (QC) 3.0. This configuration allows for simultaneous charging of multiple devices with varying power requirements. The charger supports a wide range of output options from 3.3V to 20.0V, ensuring compatibility with everything from smartphones to laptops. Enhanced safety is provided through built-in protections against overload, short-circuiting, and overheating, safeguarding both the charger and your devices. It incorporates USB Power Delivery (PD) 3.0 and Quick Charge (QC) 3.0 technologies for rapid charging and features Programmable Power Supply (PPS) compliance to optimize charging efficiency while minimizing heat generation. Additionally, the charger comes with a 1.5m 100W USB-C to USB-C cable equipped with an E-mark chip for enhanced convenience and versatility. (Note: A charging cable with an E-Mark chip is required for power delivery greater than 3 amps.) |
Bachmann distribution block WIELAND GST18 1xIn/3xOut with locking tabs, 5 m, black
Product Code: 375.123
DCP SIA © 2025
Powered By:
