STANDARD 

UTP Patch Cord Cat.5e, beige 1 m

MINIMUM ORDER 200 Units Prepared cable with unshielded RJ-45 plug on both ends (without coding) incl. kink protection. Connection cable for structured building cabling. Impedance: 100 Ohm. Contact settings 1:1 in accordance with EIA / TIA 568, 8 lines. Construction: internal line 8 wires

UTP Patch Cord Cat.5e, beige 7 m

Prepared cable with unshielded RJ-45 plug on both ends (without coding) incl. kink protection. Connection cable for structured building cabling. Impedance: 100 Ohm. Contact settings 1:1 in accordance with EIA / TIA 568, 8 lines. Construction: internal line 8 wires

UTP Patch Cord, Cat.6, beige 0.5 m

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire.

UTP Patch Cord, Cat.6, beige 3 m

Patch cable for networking connections between devices. Prepared unshielded Twisted Pair cable with RJ-45 connectors on both ends. Durable due to moulded kink protection. Flexible cable, suitable for narrow bending. Plugs with gold plated contacts. Contact settings 1:1, in accordance with the EIA/TIA 568 standard. Construction: 4-pair stranded wire.

USB 3.0 Cable, Type A M - B M 1.8 m

A new major feature of USB 3.0 is SuperSpeed bus, which increases the maximum transfer rate to 5.0 Gbit/s. USB 3.0 receptacles are compatible with USB 2.0 device plugs for the respective physical form factors. The cables can be used with PCs with the actual Type A F.

USB 3.0 Cable, USB Type A M - USB Type Micro B M 2.0 m

A new major feature of USB 3.0 is SuperSpeed bus, which increases the maximum transfer rate to 5.0 Gbit/s. USB 3.0 receptacles are partly compatible with USB 2.0 device plugs for the respective physical form factors. The cables can be used with PCs with the actual Type A interface. The new USB 3.0 Type B connectors are not downwards compatible. For the...

USB 2.0 Cable, Type A-B 3 m

MINIMUM ORDER 100 UnitsType: A-B Length: 3.0m

ROLINE USB 2.0 Cable, Type A-A, M - F 1.8m

MINIMUM ORDER 250 UnitsType: A-A, M-F Length: 1.8m Colour: beige

Secomp USB 2.0 Cable, Type A - 5-Pin Mini, 1.8 m

Minimum order 250 pcs

USB 2.0 Cable, USB Type A M - Micro USB B M 1.8 m

MINIMUM ORDER QUANTITY 250 PCS USB Cable with one Type A and one Micro USB Connector Meets standard USB 2.0 (transfer rate up to 480 Mbps)

Secomp STANDARD Cableadapter, VGA+Audio - HDMI, M/F, 0.23 m

SVGA Cable, HD15 M - HD15 M 2 m

Minimum quantity for order - 20 pcsQuality cable for connection of a monitor to a graphics card or VGA splitter or amplifier Suitable for covering long distances (depending on graphics card and resolution) with high resolution Double-shielded cable (braided and foil shield) consisting of: 3 coax lines for the RGB signals and 7 AWG28 wires Thumbscrews

SVGA Cable, HD15 M - HD15 M 10 m

Quality cable for connection of a monitor to a graphics card or VGA splitter or amplifier Suitable for covering long distances (depending on graphics card and resolution) with high resolution Double-shielded cable (braided and foil shield) consisting of: 3 coax lines for the RGB signals and 7 AWG28 wires Thumbscrews

Secomp SVGA Cable + Ferrite, HD15 M - HD15 M, black, 2.0 m

Monitor DVI Cable, DVI M - DVI M, (24+1) dual link 5 m

DVI is the standard for the digital transmission between Graphic card and Digital monitor (e.g. TFT) Advantage: No quality loss during Digital- / Analog- conversion For the 38 cm TFT-monitors we recommend the "single link" version, for TFT`s > 38 cm "dual link" cables

DisplayPort Cable, DP M - DP M 5 m

DisplayPort is a digital display interface standard that defines a new digital audio/video interconnection. The intension of the DisplayPort is to be used primarily between a computer and its display monitor, or a computer and a home-theater.