INTELLINET PoE+ Switch 24-Port Gigabit mit 2 SFP-Ports 370W

INTELLINET

561242

New

High-Power Unmanaged PoE Switch with LCD Status Display_x000D_
_x000D_
The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports (561242) passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1,000 Mbps._x000D_
_x000D_
_x000D_
_x000D_
Power over Ethernet 802.3at_x000D_
_x000D_
This high-powered switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter._x000D_
_x000D_
_x000D_
_x000D_
Innovative LCD Status Display_x000D_
_x000D_
The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports is equipped with an LCD status screen on the front that provides real-time power information. This includes how much power each connected PoE device consumes, the combined used-power total of all connected devices and the total power available. Additionally, the LCD screen informs users of potential warnings for overload, high temperature, short-circuit protection and others. Thanks to this feature, you are always informed about the status of your PoE switch with a glance at the screen._x000D_
_x000D_
_x000D_
_x000D_
Eliminate Bottlenecks with 26 Gigabit Ports._x000D_
_x000D_
Equipped with 24 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small, form-factor pluggable GBIC module slots (SFP) provide fibre connectivity for greater distances. These are not shared combo-ports but true Gigabit ports,pushing the total available bandwidth up to 52 Gbps. _x000D_
_x000D_
* Total PoE budget for this switch is 370

Switch typeUnmanaged
Basic switching RJ-45 Ethernet ports quantity24
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
SFP module slots quantity2
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-T
Cable types supportedCat5, Cat5e
Full duplex
Flow control support
Auto MDI/MDI-X
Auto-sensing
MAC address table8192 entries
Switching capacity52 Gbit/s
Store-and-forward
Packet forwarding rate (1 Gbps)1488000 pps
Packet forwarding rate (100 Mbps)148800 pps
Packet forwarding rate (10 Mbps)14880 pps
Packet buffer memory0.512 MB
Rack mounting
Form factor1U
Product colourBlack
Housing materialMetal
LED indicatorsActivity, Link, PoE, Power, Speed
Number of fans2 fan(s)
CertificationFCC Class A, CE, RoHS
Noise level21.3 dB
Mean time between failures (MTBF)144000 h
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)420 W
Power protection featuresOver voltage, Overload, Short circuit
Power over Ethernet (PoE)
Power over Ethernet plus (PoE+) ports quantity24
Power over Ethernet (PoE) power per port30 W
Total Power over Ethernet (PoE) budget370 W
Operating temperature (T-T)0 - 45 °C
Storage temperature (T-T)-10 - 70 °C
Operating relative humidity (H-H)10 - 90%
Width441.1 mm
Depth204.3 mm
Height44 mm
Weight4 kg
Cables includedAC
Manual
Rack mount kit
Harmonized System (HS) code85176990

Network switches

Accept Site use cookies