LINDY 70m Cat.6 HDMI 10.2G & IR Extender mit PoC & Loop Out

Lindy

38208

Jauns

Extends HDMI & IR Signals up to 70m using a single Cat.6 Cable Supports resolutions up to 3840x2160@30Hz 4:4:4 8bit Features a loop-through HDMI output on the Transmitter for local monitoring Supports power over Cable, only a single power supply is required 2-year warrantyCat.6 extenders allow for cost effective, reliable extension of audio or video signals over longer distances that are not possible with passive cable or active repeater solutions.The Lindy 70m Cat.6 HDMI 10.2G & IR Extender is a simple to use solution which lets the user extend HDMI signals up to 70m using a single low cost Cat.6 U/UTP cable (not included). For added convenience, IR signals (20-60 kHz) can also be extended using the supplied IR receiver and emitter cables.Supporting 4K resolutions up to 3840x2160@30Hz 4:4:4 8bit, video content can be seen with incredible clarity at distances up to 70m, perfect for use in a variety of AV and digital signage applications in a range of settings including residential setups, education, business, retail and healthcare.This extender features an HDMI loop-out port on the transmitter for local simultaneous viewing so that a local display can be connected for monitoring or to create an additional viewing zone. To ensure the maximum compatibility when two displays are connected, the EDID data, which determines the supported video and audio formats, can be copied from either the local display connected to the transmitter or the remote display connected to the receiver.Power over Cable (PoC) functionality enables the extender to operate from a single power supply connected to the transmitter, allowing the receiver to be located where there is limited access to mains power sockets, making it ideal for minimalist, discreet installations.In addition to PoC functionality the extender's slim design allow it to be easier to install in limited spaces behind flat screen monitors or TVs.Please Note: The quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or introducing wall plates, couplers or patch panels will result in a reduction of possible distances.

TypeAV transmitter & receiver
Maximum resolution3840 x 2160 pixels
Cable types supportedCat6
Maximum transfer distance70 m
ChipsetGSV1001
Maximum refresh rate60 Hz
Extended display identification data (EDID)Y
Audio output channels7.1 channels
Supported graphics resolutions1920 x 1080 (HD 1080), 3840 x 2160
Bandwidth10.2 Gbit/s
HDCPY
MaterialMetal
HDCP version1.4
Product colourBlack
CertificationCE, FCC, RoHS, REACH
Connectivity technologyWired
RJ-45 input ports1
RJ-45 output ports1
HDMI in1
Number of HDMI outputs2
HDMI version1.4
Remote (IR) input1
Remote (IR) output1
Operating voltage12 V
Input current1 A
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-20 - 60 °C
Operating relative humidity (H-H)20 - 90%
Width79.5 mm
Depth69 mm
Height16.5 mm
Weight130 g
Package width200 mm
Package depth70 mm
Package height113 mm
Package weight414 g
AC adapter includedY
ManualY
IR receiver includedY
Sustainability certificatesCE, REACH, RoHS

Pārveidotāji / Raiduztvērēji / Pastiprinātāji

Accept Site use cookies