Network connectors
There are 469 products.
85124
Description This adapter enables you to extend a network connection and can be used to connectvarious devices. The female port can be attached with two screws, e.g. to a slot bracket, a cable duct or an enclosure with the corresponding opening. This can be used to install aRJ45 jack at an easily accessible position.
86088
This RJ45 adapter by Delock can be connected e.g. between two cables in order to extend your network connection.
86140
This RJ45 adapter by Delock can be connected e.g. between two cables in order to extend your network connection.
86141
Description This module by Delock can be used to extend a twisted pair cable. With its standardised dimensions it can be used for easy snap-in mounting in e. g. a Keystone patchpanel, face plate or surface-mount box.
86154
Description This module by Delock can be used to connect twisted pair cable to an RJ45 jack. With its standardised dimensions it can be used for easy snap-in mounting in e. g. a Keystone patchpanel, face plate or surface-mount box.
86165
This RJ45 adapter by Delock can be connected e.g. between two cables in order to extend your network connection.
86166
Description This module by Delock can be used to extend a twisted pair cable. With its standardised dimensions it can be used for easy snap-in mounting in e. g. a Keystone patchpanel, face plate or surface-mount box.
86167
With this coupler from Delock you can extend or repair two network cables without additional connectors. The LSA blocks can be used with a punch down tool; alternatively, a tool-free connection is possible.
86168
This module by Delock can be used to connect a telephone cable to an RJ12 female port. With its standardised dimensions it can be used for easy snap-in mounting in e. g. a Keystone patchpanel, face plate or surface-mount box.
86170
This Dust Cover by Delock can protect RJ45 connectors on network cables from dirt or damage.
86176
This Dust Cover by Delock can protect network, ISDN or SFP connectors from dirt or damage.
86243
With this coupler from Delock you can extend or repair two network cables without additional connectors. The LSA blocks can be used with a punch down tool; alternatively, a tool-free connection is possible.
86249
This RJ45 adapter by Delock can be connected e.g. between two cables in order to extend your network connection.
86255
Description This Keystone holder by Delock can be mounted on DIN rails. With its standardized dimensions, it is suitable for easy snap-in mounting of two Keystone modules.
86259
Description This Keystone holder by Delock can be mounted on DIN rails. With its standardized dimensions, it is suitable for easy snap-in mounting of one Keystone module.
86265
This RJ45 plug by Delock can be used to connect network cables. The tool-free plug installation of various cable types is time-saving.
86282
Description This Delock Keystone mounting can be installed into an existing cut-out of a desk and enables you to lead out the cables for monitor, keyboard and mouse. With its standardized dimensions, it is suitable for easy snap-in mounting of four Keystone modules. Note Due to the narrow design only keystone modules up to max. 17.5 mm width can be used.
86305
This module by Delock can be used to extend e. g. a coax cable. With its standardised dimensions it can be used for easy snap-in mounting in e. g. a Keystone patchpanel, face plate or surface-mount box.
86420
It is a common problem with patch cords that the latch for locking in the RJ45 socket breaks off. With this clip from Delock you can easily and quickly repair the damaged network connector. The repair clip is attached on the connector and replaces the missing latch. Available in different colors, it can also be used for cable marking.
86421
It is a common problem with patch cords that the latch for locking in the RJ45 socket breaks off. With this clip from Delock you can easily and quickly repair the damaged network connector. The repair clip is attached on the connector and replaces the missing latch. Available in different colors, it can also be used for cable marking.
86422
It is a common problem with patch cords that the latch for locking in the RJ45 socket breaks off. With this clip from Delock you can easily and quickly repair the damaged network connector. The repair clip is attached on the connector and replaces the missing latch. Available in different colors, it can also be used for cable marking.
Network connectors
- Adapters / Converters
- Lighting
- Automation technology
- Office / Staff accessories
- Data storage / Memory modules
- Computer Components
- Tools / Measuring
- Switches / HUB
- Cables
- Audio / Video
- Apple
- Antenna IEC/F
- BNC coaxial
- Displayport
- DVI
- eSATA / S-SATA / ATA / IDE
- FireWire
- HDMI
- HSD Z
- Retractable
- Keyboards
- KVM
- M8
- M12
- MC4 , DL4 Solar
- Optical cables
- SAS
- Communications / Telephone
- SCSI
- Serial / Parallel
- STANDARD
- Power cables
- SFP
- Network RJ45
- Pallets
- Thunderbolt
- RJ 50
- ROLINE GOLD CABLES
- USB
- VGA / SVGA
- Connectors
- Multimedia / Peripherals
- GPS Navigation
- RF radio frequency technologies
- Network products
- 19" rack-mounts / accessories
- WLAN
- Printer servers
- GBIC Modules
- Industrial networks
- Cat. 5e network UTP FTP S/FTP cables
- Cat 6 / 6a network UTP FTP S/FTP cables
- Cat. 7 network S/FTP cables
- Pallets
- Keystone
- Switches and Hubs
- Switching panels
- Routers / accessories
- Modems
- Optical cables / adapters
- Converters / Transceivers / Repeaters
- PoE LAN devices
- Telephone cables / adapters
- Network adapters
- Network connectors
- Network sockets
- UPS / Power features
- Video surveillance systems