Produkti no ražotāja NAVILOCK 
- 1
- 2
12457
This Navilock multi-band antenna has three physically separate transmitting and receiving units. The GPS patch antenna receives the signals of the Global Navigation Satellite System GPS. Two PIFA antennas, respectively, for LTE and GSM / UMTS are responsible for sending and receiving in these areas. Due to its outdoor features, the multiband antenna is...
20641
Whether and when this item will be back in stock, is unknown.Plastic case suitable for iPhone 4 / 4SCable length: ca. 1,80 mSteel cable with plastic coverCastle made of metalAnti-slip silicone pads
20642
Description This Navilock security cable enables you to lock your camera at any place. After fixing the lock to the camera you can use all functions like before. The coiled steel cable with 3 digit combination lock can be tied easily around objects like pillar, table-leg or anything similar in order to secure your device against theft.
20643
This Navilock Notebook security lock enables you to lock different devices e.g. notebook, beamer, monitor etc. at any place. The steel cable with its 1.8 m and 4 digit combination lock can be tied easily around to objects like chairs, table-leg or anything similar and thus your device will be saved against theft.
20647
This Navilock USB lock can be used to secure a USB type A male e.g. USB stick with USB type A port against unauthorised access. Further you can lock a suitcase. The USB lock can be placed at the key ring.
41337
This external Navilock 5 V power supply enables you to connect several products with power.
41382
This external Navilock 5 V power supply enables you to connect several products with power.
41391
This external power supply by Navilock enables you to provide power for different devices, e.g. 3.5â³ with 15 pin SATA interface.
41415
This external Navilock 12 V power supply enables you to connect several products with power.
41501
This external battery by Navilock can be used for all common devices with USB power supply. The power bank has two USB Type-A ports to charge two devices at the same time. One USB port offers the Qualcomm® Quick Charge⢠3.0 support, thus it can charge e.g. smart phones with Qualcomm® Quick Charge⢠3.0 function in much shorter time. Further the Micro...
41502
This external battery by Navilock can be used for all common devices with USB power supply. The power bank has one USB Type-A port and one USB-C⢠port to charge two devices at the same time. The USB-C⢠port has two functions, one is to charge the power bank as well as charge connected devices.
60134
The Micro USB GPS receiver with MediaTek chipset has a built-in active antenna. Due to the Micro USB connector it is most suitable on the way for most notebooks, smartphones and tablets etc.
60324
The Bluetooth GNSS receiver BT-821G is using the MTK MT3333 chipset. In combination with a mobile device such as smart phone, laptop or tablet and a suitable routing software navigation is possible.
60428
This is an extremely small powerful GPS module with u-blox 6 chipset. It is characterized by fast response, high sensitivity and low power consumption.
60431
This engine module is a GNSS receiver with connector for an external GPS / GLONASS antenna.
60432
This is a complete ready to use GPS receiver.The EM-506 is a OEM Engine Board with SiRF Star IV chipset, integrated patchantenna and PPS pulse per second/LED pin.
60506
This GPS antenna by Navilock can be used with an existing GPS receiver or PNA with SMA connection. Improvement of reception will be provided by placing the antenna, e.g. on the hat rack or car roof, where it has a better or free view to the sky. The antenna is waterproof and can temporary also be used outside of the vehicle.
60508
This GPS antenna by Navilock can be used with an existing GPS receiver or car receicer with FAKRA-C connection. Improvement of reception will be provided by placing the antenna, e.g. on the hat rack or car roof, where it has a better or free view to the sky. The antenna is waterproof and can temporary also be used outside of the vehicle.
60521
This GPS antenna by Navilock can be used with an existing GPS receiver or PNA with SMA connection. Improvement of reception will be provided by placing the antenna, e.g. on the hat rack or car roof, where it has a better or free view to the sky. The antenna is waterproof and can temporary also be used outside of the vehicle.
60554
You can use this active antenna for your GNSS equipment to receive GPS and BeiDou (COMPASS) signals simultaneously.
60559
This antenna by Navilock can be used on GNSS devices to receive GPS, GLONASS and GALILEO satellite signals at the same time.
60560
This high-precision antenna by Navilock can be used on GNSS devices to receive GPS, GLONASS, GALILEO and COMPASS / BEIDOU satellite signals at the same time.
61232
The NL-65AT is recommended for use in vehicles using thermal protective vitrification. Thereby, the GPS receiver or PNA achieves higher signal strength, and thus a higher number of available satellites. Reception clearly improves by use of the NL-65AT, particularly when the GPS receiver or PNA is mounted in a location where the sky is not visible.
61264
Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox, Sony, GLONASS and SiRF. In order to connect the GNSS receiver to a USB port you need this specific connecting cable. The USB connector provides power to the GNSS receiver and contains the data channels. For integration into...
61265
Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox, Sony, GLONASS and SiRF. In order to connect the GNSS receiver to a serial port you need this specific connecting cable. It will be connected to the PS2 jack of your notebook, or tablet PC for power supply. The PS2 connector...
61396
With the Navilock power supply you can charge USB devices, e.g. IPod, PDA, mobile phone and other devices, or supply them with power.
61467
The NL-64AT is recommended for use in vehicles using thermal protective vitrification. Thereby, the GPS receiver or PNA achieves higher signal strength, and thus a higher number of available satellites.
61663
This USB car charger by Navilock enables you to operate and charge your USB devices via cigarette lighter in your car. The small size of the adapter enables you to leave it plugged permanently inside the cigarette lighter and still close the cover of some cars.
61840
The USB 2.0 GPS Receiver based on u-blox 6 SuperSense® chipset has a built-in antenna for high sensitivity. You can use this GPS Receiver with a notebook and a suitable routing software for navigation.
61842
The GPS receiver with u-blox 6 SuperSence® chipset can receive WAAS and EGNOS data besides GPS. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-604P GPS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit...
61958
This USB charger by Navilock enables you to operate and charge up to two USB devices in your car or truck through the cigarette lighter. It supports a voltage supply of total 2100 mA for both USB ports together. Thus it provides the total 2100 mA when connecting only one USB device. Hence the voltage will be divided on both USB ports when connecting two...
61994
The USB 2.0 GPS Receiver based on SiRFstarIV⢠chipset has a built-in antenna for high sensitivity. You can use this GPS Receiver with a notebook and a suitable routing software for navigation.
62447
The GPS receiver based on u-blox 6 NEO-6P module works very precise and it is ideal for positioning tasks because of the integrated PPP (Point Positioning Precision) function. PPP combined with SBAS allows high-precision applications in surveying, maritime and agriculture (precision farming). The MD6 universal connector enables the connection of optional...
62456
The USB 2.0 GPS receiver based on u-blox 6 NEO-6P module works very precise and it is ideal for positioning tasks because of the integrated PPP (Point Positioning Precision) function. PPP combined with SBAS allows high-precision applications in surveying, maritime and agriculture (precision farming).
62515
This USB charger by Navilock enables you charge up to two USB devices, like cell phones, smart phones, MP3 players or iPhones / iPads, in your car or truck through the cigarette lighter. It supports a voltage supply of 3100 mA for both USB ports in total, i.e. if two USB devices are connected, the current is divided accordingly between both ports,...
62516
This power supply by Navilock enables you to charge up to two USB devices, like cell phones, smart phones, MP3 players or iPhones / iPads, at the same time. It supports a voltage supply of 2100 mA in total. Thus the entire 2100 mA are available when connecting only one USB device, but if two USB devices are connected, the current is divided accordingly...
62523
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation.
62524
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation.
62525
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables.
62526
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables.
62527
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8004P GNSS receiver can be installed onto different...
625272
The serial RS-232 multi GNSS receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS receiver with a laptop and a suitable routing software for navigation. The NL-8044P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can...
62528
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8044P GNSS receiver can be installed onto different...
62529
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8022MP GNSS receiver is especially designed for...
62530
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8222MP GNSS receiver is especially designed for...
62531
The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The NL-8004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can...
62532
The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The NL-8022MU GNSS receiver is especially designed for installation on a white ground (boat, camper, bus etc.) It is unremarkable and fits into the vehicle...
62573
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
62577
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
62578
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
62579
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
62586
The 4 pin stereo jack TTL multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity.
62587
The 4 pin stereo plug TTL multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity.
62621
Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox and SiRF. In order to connect the GNSS receiver to a serial port you need this specific connecting cable. It will be connected to the PS2 jack of your laptop, or tablet PC for power supply. The PS2 connector is only a power...
62624
This Navilock charging bar can be used for charging up to six USB devices at the same time. You can charge USB devices with high power consumption up to 2.5 A, e. g. iPad or other tablet PCs. Through the different enclosed power supply plugs you you can use the charging bar in different countries as well as in the car.
62665
The MD6 serial multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the...
62675
This Navilock USB power supply can be used to charge one USB device. With Qualcomm® Quick Charge⢠2.0 technology, supported devices can be charged up to 75% faster. This power supply adjusts the output voltage to the device being used, and thereby achieves a charging time, which is up to two thirds shorter. Other USB devices can be charged with up to...
62677
This Navilock USB power supply can be used to charge one USB device. With Qualcomm® Quick Charge⢠2.0 technology, supported devices can be charged up to 75% faster. This power supply adjusts the output voltage to the device being used, and thereby achieves a charging time, which is up to two thirds shorter. Other USB devices can be charged with up to...
62689
This Navilock charging station can be used to charge up to four devices with power at the same time. The holder supports up to two devices like smartphones or tablets to be put into the station. The LED indicator shows the accumulated amperage value of all connected devices.
62739
This Navilock USB car charger can be used to charge two USB devices. One USB port is equipped with Qualcomm® Quick Charge⢠3.0 technology, thereby supported devices can be charged up to 4 times faster. The second USB port provides up to 2.4 A with intelligent charging technology for conventional devices.
62745
GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses TTL 3.30 V. Several integrated sensors allow position determination without GNSS signals.
62746
This Navilock USB power supply can be used to charge one USB device.
62747
This Navilock USB power supply can be used to charge one Micro USB device.
62755
The MD6 serial multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the...
62756
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted.
62758
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted.
62779
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed...
62780
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82022MU GNSS receiver is especially...
62782
This Navilock USB car charger can be used to charge two USB devices. One port is equipped with a USB Type-C⢠connector, thereby supported devices can be charged with up to 3 A. The second port with a USB Type-A connector provides up to 2.4 A with intelligent charging technology for conventional devices.
- 1
- 2
Sadaļas
- Adapteri / Konverteri
- Apgaismojums
- Automatizācijas tehnoloģijas
- Biroja / Personāla aprīkojums
- Datu nesēji / Atmiņas moduļi
- Datoru Komponentes
- Darbarīki / Mērinstrumenti
- Datu slēdži / HUB
- Kabeļi
- Audio / Video
- Apple
- Antenas IEC/F
- BNC koaksiālie
- Displayport
- DVI
- eSATA / S-SATA / ATA / IDE
- FireWire
- HDMI
- HSD Z
- Izvelkamie
- Klaviatūras
- KVM
- M8
- M12
- MC4 , DL4 Saules
- Optiskie kabeļi
- SAS
- Sakaru / Viedierīču
- SCSI
- Serial / Parallel
- STANDARD
- Strāvas kabeļi
- SFP
- Tīkla RJ45
- Tīkla ruļļi
- Thunderbolt
- RJ 50
- ROLINE GOLD kabeļi
- USB
- VGA / SVGA
- Konektori
- Multimēdija / Perifērija
- Navigācija / GPS
- RF Radiofrekvenču tehnoloģijas
- Tīkla produkti
- 19" skapji / piederumi
- Bezvadu lokālie tīkli WLAN
- Drukas serveri
- GBIC Moduļi
- Industriālie tīkli
- Kat. 5e tīkla UTP FTP S/FTP kabeļi
- Kat. 6 / 6a tīkla UTP FTP S/FTP kabeļi
- Kat. 7 tīkla S/FTP kabeļi
- Tīkla ruļļi
- Keystone
- Komutatori un centrmezgli
- Komutācijas paneļi
- Maršrutētāji / aksesuāri
- Modēmi
- Optiskie kabeļi / adapteri
- Pārveidotāji / Raiduztvērēji / Pastiprinātāji
- PoE LAN ierīces
- Telefona kabeļi / adapteri
- Tīkla adapteri
- Tīkla konektori
- Tīkla rozetes
- UPS / Barošanas elementi
- Videonovērošanas sistēmas